User Manual

Installing the Printer Driver

The SHARP

PCL XL

printer driver is provided in the CD-ROM in the FO-NP1

printer kit. This driver must be installed in every computer that uses the

printer.

Important:

The printer driver cannot be installed unless the FO-NP1 Printer

Expansion Kit and FO-LN1 LAN interface have been installed in the machine

and the machine is ready for use as a network printer.

♦ Before installing the printer driver, be sure to read the “Readme” file on the

CD-ROM (Option\English\Readme.txt) for the latest information.

System Requirements

You will need the following hardware and software in order to install the printer

driver.

Printing out the IP address of the printer

In some cases it is necessary to enter the IP address of the machine when

installing the printer driver. To check the IP address, follow the procedure in

Printing out the Network Settings

on page 72.

Computer

• IBM PC/AT or compatible computer equipped with an

Ethernet interface

Operating System

• Windows 98 Second Edition, Windows Me, Windows NT

4.0 Workstation/Server (Service Pack 3 or later),

Windows 2000 Professional/Server, XP Home/

Professional.

CPU

• Windows 98 / Windows NT 4.0 / Windows Me / Windows

2000: Pentium, 200 MHz or higher

• Windows XP: Pentium, 300 MHz or higher

RAM

• Windows 98 / Windows NT 4.0 / Windows Me / Windows

2000: 64 MB or higher

• Windows XP: 128 MB or higher

all.bookPage98Wednesday,May21,20036:03PM