User Manual

Installing the Printer Driver
100
4 Select “ Create a new port ” and select “ Standard TCP/IP Port ” from the list.
Click
Next .
5 The “Add Standard TCP/IP Printer Port Wizard” will appear. Click Next .
6 Enter the IP address of the printer (the port name is filled in automatically).
• If you need to check the IP address, follow the procedure in
Printing out the
Network Settings
on page 72.
Make sure that the printer has been turned on and has been configured for
network printing, and then click the
Next button.
all.bookPage100Wednesday,May21,20036:03PM