User Manual
Programming Auto-Dial Numbers
43
2. Send/Receive
Documents
11
Press or to select “YES” if the number programmed is an
area code or access code to be used for Chain Dialling (see
Chain
Dialling
at the end of this procedure). Select “NO” if the number is a
regular fax number. After making the selection, press .
12
Return to Step 5 to program another number, or press repeatedly
to return to the date and time display.
• If you programmed a Rapid Key number, you can write the name of the
party on the label above the Rapid Key.
START/
ENTER
STOP
Chain Dialling for area and access codes
You can also program an area code or access code in a Rapid Key or Speed
Dial number using the above programming procedure. In Step 11, select
“YES” to set the number as a Chain Dialling number.
After you dial an area code or access code using a Rapid Key or Speed Dial
number set for Chain Dialling, the machine will wait for you to dial the
remainder of the number (you can dial the remainder of the number by
pressing a Rapid Key, by pressing the Speed Dial key and entering a Speed
Dial number, or by pressing numeric keys). Note that the remainder of the
number should not be set as a Chain Dial number if programmed in a Rapid
Key or Speed Dial number.
♦ The maximum number of digits that can be dialled at one time by Chain
Dialling is 60.
all.bookPage43Wednesday,May21,20036:03PM