User Manual
EN-10
CARE AND MAINTENANCE 1
Gently remove dust from the back panel, using a
vacuum cleaner attachment or similar tool.
Back Panel
Back Panel
1. Add a small amount of dish detergent to water
and soak for about 10 minutes.
2. Rinse off the dish detergent with clean water.
3. Completely dry the lter in a well-ventilated area.
How to clean hard to remove dirtNOTE
Be careful not to apply too much force to the pre-lter.
NOTE
• To maintain optimum performance of this air purier, please clean the
product including the lter periodically.
• Be sure to stop operation and unplug the product before any maintenance
or replacing accessories.
Tag
Gently remove dust from the True HEPA filter with a vacuum
cleaner attachment or similar tool.
• Do not WASH in water and DRY in the sunlight.
• Perform maintenance only on the side with the tag.
Do not clean the opposite side; otherwise, the lter will be
damaged.
The lter is fragile, be careful not to apply too much force.
Wipe with a dry, soft cloth.
For stubborn stains or dirt, use a soft cloth dampened with warm water.
• Do not use volatile uids.
Benzine, paint thinner, polishing powder, etc. , may damage the surface.
• Do not use detergents.
Detergent ingredients may damage the main unit.
NOTE
MAIN UNIT
TRUE HEPA FILTER
BACK PANEL
(Pre-lter)
NOTE
Once a month
Whenever dust accumulates, when odor
emanates from the air outlet, or once a month.
OM_FP-F30U_EN.indd 10 2019/07/04 11:07:30