Operation Manual
Table Of Contents
E-10
CLEANING THE FILTERS
1
Turn o the unit, and unplug the
power cord.
2
Remove the Front Panel.
(Refer to E-8)
3
Clean the lter and Dust sensor.
Gently remove dust from the lter, using a
vacuum cleaner with attachment or similar tool.
Dust Sensor
(FP-A80U only)
Remove the Sensor cover, and remove the
dust on the Sensor lter.
If it is very dirty, wash it with water and dry it
thoroughly.
CLEANING THE UNIT
Dust sensor
(FP-A80U only)
Deodorizing Pre lter
Sensor cover
Sensor lter
MAINTENANCE
Wipe with a dry, soft cloth.
For stubborn stains or dirt, use a soft cloth
dampened with warm water.
Do not use volatile uids and
detergents.
Benzine, paint thinner, polishing powder,
detergent ingredients etc., may damage
the unit.
Care Cycle :
Whenever dust accumulates on the unit or every 1 month.
FP-A80U_A60U_5th.indb 10FP-A80U_A60U_5th.indb 10 2022/01/24 10:37:042022/01/24 10:37:04