Low and High Voltage Power Supplies
ISO 9001: 2008 We work according to Since 1994 Fug works according to the quality assurance system ISO 9001. All shipped units are checked and documented in our testing department with calibrated measuring devices for compliance to the guaranteed characteristics. All our products are marked. So we guarantee compliance with all relevant European standards and regulations.
Content Page Product overview 4 Standard type ranges of power supplies 6 Low voltage power supplies double stabilized/ Series NTN from 6,5 V to 350 V / 35 W tos 100 kW 6 Low voltage power supplies thyristor regulated/ Series NYN from 12,5 V to 350 V / 7 kW to 100 kW 10 Autoranging power supplies/ Series NCA / MCA from 55 V to 3000 V / 750 W to 9000 W 12 Medium voltage power supplies/ Series MCP from 125 V to 2000 V / 14 W to 15 kW 14 Medium voltage power supplies thyristor regulated/ Series MY
Product overview Power supply family Function Type range Low voltage power supplies linear regulated with thyristor pre-regulation NTN thyristor regulated NYN Autoranging power supplies switched NCA/ MCA Medium voltage power supplies switched MCP thyristor regulated MYN switched HCP switched HCH thyristor regulated HYN High voltage cassette power supplies switched HCE High voltage capacitor charger switched HCK Power supplies for superconductors linear regulated with thyristor
Product overview Upper and lower limits of the maximum output values of each type range Vmin Volts Vmax Volts Imin Amps Imax Amps Page Pmin Watts Pmax Watts Emin J/s Emax J/s 6,5 350 0,5 4.000 35 100.000 6 12,5 350 60 4.000 7.000 100.000 10 55 3.000 0,75 180 750 9.000 12 125 2.000 0,006 120 14 15.000 14 650 2.000 10 100 7.000 70.000 17 3.500 300.000 0,0003 4,5 14 15.000 19 650 300.000 0,008 75 2.800 50.000 22 3.500 20.000 0.3 20 7.000 70.
Low voltage power supplies double stabilized Series NTN from 6,5 V to 350 V / 35 W to 100 kW Cooling is carried out via Recovery time: convection or built-in fans, with the air being exhausted (depending upon type) either via the rear or the top. For high power units water cooling can also be used.
Low voltage power supplies double stabilized Series NTN from 6,5 V to 350 V / 35 W to 100 kW Type Voltage Current Width Height Depth Weight NTN 35 - 6,5 0 - 6,5 V 0 - 5 A ½19" / 222 mm 3 U / 133 mm 350 mm 5 kg NTN 140 - 6,5 0 - 6,5 V 0 - 10 A ½19" / 222 mm 3 U / 133 mm 350 mm 8 kg NTN 350 - 6,5 0 - 6,5 V 0 - 30 A 19" / 443 mm 3 U / 133 mm 450 mm 18 kg NTN 700 - 6,5 0 - 6,5 V 0 - 60 A 19" / 443 mm 4 U / 177 mm 450 mm 30 kg NTN 1400 - 6,5 0 - 6,5 V 0 - 120 A
Low voltage power supplies double stabilized Series NTN from 6,5 V to 350 V / 35 W to 100 kW Type Voltage Current Width Height Depth Weight NTN NTN NTN 35 - 35 140 - 35 350 - 35 000- 35 V 35 V 35 V 000- 1A 4A 10 A ½19" / 222 mm ½19" / 222 mm 19" / 443 mm 3 U / 133 mm 3 U / 133 mm 3 U / 133 mm 350 mm 350 mm 350 mm 5 kg 8 kg 17 kg NTN NTN NTN 700 - 35 1400 - 35 2800 - 35 2) 000- 35 V 35 V 35 V 000- 20 A 40 A 80 A 19" / 443 mm 19" / 443 mm 19" / 443 mm 4 U / 177 mm 4 U / 177 mm 7 U / 3
Low voltage power supplies double stabilized Series NTN from 6,5 V to 350 V / 35 W to 100 kW Type Voltage Current Width Height Depth Weight NTN 700 - 200 0 - 200 V 0 - 3 A 19" / 443 mm 4 U / 177 mm 350 mm 24 kg NTN 1400 - 200 0 - 200 V 0 - 6 A 19" / 443 mm 4 U / 177 mm 450 mm 42 kg NTN 2800 - 200 2) 0 - 200 V 0 - 12 A 19" / 443 mm 5 U / 221 mm 550 mm 55 kg NTN 4200 - 200 2) 0 - 200 V 0 - 20 A 19" / 443 mm 9 U / 399 mm 550 mm 90 kg NTN 7000 - 200 3) 0 - 20
Low voltage power supplies thyristor regulated Series NYN from 12,5 V to 350 V / 7 kW to 100 kW Design Example The following data applies for voltage and current regulation, and refers to the rated value (unless otherwise stated): (For explanations please refer to Definitions and Terms on page 54.) Setting range: from approx.
Low voltage power supplies thyristor regulated Series NYN from 12,5 V to 350 V / 7kW to 100 kW Type Voltage Current Width Height Depth Weight NYN NYN NYN 7000 - 12,5 10500 - 12,5 14000 - 12,5 000- 12,5 V 12,5 V 12,5 V 000- 500 A 800 A 1000 A 19" / 600 mm 19" / 600 mm 19" / 600 mm 20 U / 1100 mm 38 U / 2000 mm 38 U / 2000 mm 600 mm 800 mm 800 mm 300 kg 440 kg 480 kg NYN NYN NYN 21000 - 12,5 28000 - 12,5 35000 - 12,5 000- 12,5 V 12,5 V 12,5 V 000- 1500 A 2000 A 2500 A 19" / 600 mm 19" /
Autoranging power supplies Series NCA / MCA from 55 V to 3000 V / 750 W to 9000 W Design Example MCA 9000 - 1500 1500V / 18A, max.
Autoranging power supplies Series NCA / MCA from 55 V to 3000 V / 750 W to 9000 W Type Voltage Current Width Height Depth Weight NCA 750 - 55 750 W 0 - 55 V 0 - 40 A 19" / 443 mm 3 U / 133 mm 350 mm 12 kg NCA 1500 - 55 1500 W 0 - 55 V 0 - 80 A 19" / 443 mm 3 U / 133 mm 550 mm 20 kg NCA 3000 - 55 3000 W 0 - 55 V 0 - 160 A 19" / 443 mm 3 U / 133 mm 650 mm 25 kg 750 W 0 - 150 V 0 - 15 A 19" / 443 mm 3 U / 133 mm 350 mm 10 kg 3) MCA 750 - 150 MCA 1500 - 150
Medium voltage power supplies Series MCP from 125 V to 2000 V / 14 W to 15000 W Floating output (rear side) Design example MCP 15000 - 2000 2000V / 7A MCP 140 - 1250 1250V / 100mA Features: Compact size and light weight Efficiency approx.
Medium voltage power supplies Series MCP from 125 V to 2000 V / 14 W to 15000 W The following data applies for voltage and current regulation, and refers to the rated value (unless otherwise stated): (For explanations please refer to Definitions and Terms on page 54.) Setting range: from approx.
Medium voltage power supplies Series MCP from 125 V to 2000 V / 14 W to 15000 W Type MCP Voltage 14 - 650 MCP 35 - 650 MCP 140 - 650 Current 0 0 0- 650 V 0- 650 V 650 V 0 0 0- Width Height Depth Weight 20 mA ½19" / 222 mm 3 U / 133 mm 350 mm 4 kg 0- 50 mA ½19" / 222 mm 3 U / 133 mm 350 mm 4 kg 0- 200 mA ½19" / 222 mm 3 U / 133 mm 350 mm 5 kg 650 V 0- 500 mA ½19" / 222 mm 3 U / 133 mm 350 mm 6 kg 650 V 0- 1A 19" / 443 mm 3 U / 133 mm 350 mm 9 kg 650 V
Medium voltage power supplies thyristor regulated Series MYN from 650 V to 2000 V / 7kW to 70 kW Design examples MYN 14000 - 650 650V / 20A Features: Simple construction Extremely robust High efficiency Short circuit proof and unlim ited operation with full current in short circuit condition Voltage and current regulation with automatic and sharp transition; control mode indicated by LEDs Voltage and current setting with 10-turn potentiometers with precision scale; the adjusting knob
Medium voltage power supplies thyristor regulated Series MYN from 650 V to 2000 V / 7kW to 70 kW Type Voltage Current Width Height Depth Weight MYN 21000 - 650 0 - 650 V 0 - 30 A 19" / 600 mm 38 U / 2000 mm 800 mm 480 kg MYN 28000 - 650 0 - 650 V 0 - 40 A 19" / 600 mm 38 U / 2000 mm 800 mm 600 kg MYN 35000 - 650 0 - 650 V 0 - 50 A 19" / 600 mm 38 U / 2000 mm 800 mm 800 kg MYN 70000 - 650 0 - 650 V 0 - 100 A 19" / 600 mm 38 U / 2000 mm 800 mm 1400 kg MYN 21000
High voltage power supplies Series HCP from 3,5 kV to 300 kV / 14 W to 15000 W Output terminals: All output terminals are located at the rear side of the unit. High voltage connectors with the appropriate dielectric strength are delivered with the power supply. For nominal voltage of 65kV and higher the HV- plug will be delivered ready mounted to 3m cable.
High voltage power supplies Series HCP from 3,5 kV to 300 kV / 14 W to 15000 W Type HCP Voltage Current Width Height Depth Weight 14 - 3500 0 - 3500 V 0 - 4 mA ½19" / 222 mm 3 U / 133 mm 350 mm 3 kg HCP 35 - 3500 0 - 3500 V 0 - 10 mA ½19" / 222 mm 3 U / 133 mm 350 mm 4 kg HCP 140 - 3500 0 - 3500 V 0 - 40 mA ½19" / 222 mm 3 U / 133 mm 350 mm 6 kg HCP 350 - 3500 0 - 3500 V 0 - 100 mA ½19" / 222 mm 3 U / 133 mm 450 mm 7 kg HCP 700 - 3500 0 - 3500 V 0
High voltage power supplies Series HCP from 3,5 kV to 300 kV / 14 W to 15000 W Design example HCP 15000 - 12500 12500V / 1,2A Type Voltage Current HCP 35 - 35000 0- 35000 V 0- HCP 140 - 35000 0- 35000 V HCP 350 - 35000 0- 35000 V HCP 700 - 35000 0- HCP 1400 - 35000 HCP 2800 - 35000 3) HCP 4200 - 35000 3) HCP Width Height Depth Weight 1 mA 19" / 443 mm 3 U / 133 mm 450 mm 10 kg 0- 4 mA 19" / 443 mm 3 U / 133 mm 450 mm 12 kg 0- 10 mA 19" / 443 mm 3 U
High voltage power supplies, high power Series HCH from 650 V to 300 kV / to 50 kW Design example Recovery time: Voltage control: <1ms for load changes from 10% to 100% or from 100% to 10% HCH 50000 - 20000 20kV / 2,5A Output terminals: All output terminals are located at the rear side of the cabinet or at the top of the HV container. High voltage connectors with the appropriate dielectric strength are delivered with the power supply for units with output current up to 10A.
High voltage power supplies, high power Series HCH from 650 V to 300 kV / to 50 kW Type Voltage Current Width Height Depth Weight HCH 20000 - 650 3) 0 - 650 V 0 - 30 A 19" / 600 mm 29 U / 1500 mm 600 mm 240 kg HCH 30000 - 650 3) 0 - 650 V 0 - 45 A 19" / 600 mm 38 U / 2000 mm 800 mm 300 kg HCH 40000 - 650 3) 0 - 650 V 0 - 60 A 19" / 600 mm 38 U / 2000 mm 800 mm 360 kg HCH 50000 - 650 3) 0 - 650 V 0 - 75 A 19" / 600 mm 38 U / 2000 mm 800 mm 420 kg HCH 20000
High voltage power supplies, high power Series HCH from 650 V to 300 kV / to 50 kW Type Voltage Current Width Height HCH 4200 - 65000 3) 0- 65000 V 0- 60 mA HCH 10000 - 65000 3) 0- 65000 V 0- 150 mA 19" / 600 mm HCH 15000 - 65000 3) 0- 65000 V 0- 200 mA 19" / 600 mm HCH 20000 - 65000 3) 0- 65000 V 0- 300 mA HCH 30000 - 65000 3) 0- 65000 V 0- 400 mA HCH 40000 - 65000 3) 0- 65000 V 0- HCH 50000 - 65000 3) 0- 65000 V HCH 2800 - 100000 3) 0- HCH 4200 - 10
High voltage power supplies thyristor regulated Series HYN from 3,5 kV to 20 kV / 21kW to 50 kW Design example HYN 35000 - 3500 3,5kV / 10A Features: Simple construction Extremely robust High efficiency Short circuit proof and unlim ited operation with full current in short circuit condition Voltage and current regulation with automatic and sharp transition; control modes indicated by LEDs Voltage and current setting with 10-turn potentiometers with precision scale; the adjusting kno
High voltage power supplies thyristor regulated Series HYN from 3,5 kV to 20 kV / 21 kW to 50 kW Design example HYN 200000 - 20000 20kV / 10A special version, customised design, with 20A load capacity Type Voltage Current Width Height Depth Weight HYN 21000 - 3500 0 - 3500 V 0 - 6 A 19" / 600 mm 38 U / 2000 mm 800 mm 480 kg HYN 28000 - 3500 0 - 3500 V 0 - 8 A 19" / 600 mm 38 U / 2000 mm 800 mm 600 kg HYN 35000 - 3500 0 - 3500 V 0 - 10 A 19" / 600 mm 38 U / 2000 mm 800 mm
High voltage cassette power supplies EURO-size Series HCE from 125 V to 35 kV / 7 W to 350 W Design example HCE 7 - 12500 12,5kV / 0,5mA positive HCE 35 - 35000 35kV / 1mA negative HCE 7 - 3500 3,5kV / 2mA positive (2 units) HCE 350 - 2000 2kV / 150mA positive Features: Compact size Light-weight For units from 6.
High voltage cassette power supplies EURO-size Series HCE from 125 V to 35 kV / 7 W to 350 W Optionally, the front plane can be equipped with a ten turn potentiometer for voltage adjustment.
High voltage cassette power supplies EURO-size Series HCE from 125 V to 35 kV / 7 W to 350 W 19“-(84U) frames are available as accessory Type Voltage Current Width Height Depth Weight HCE 7 - 3500 0 - 3500 V 0 - 2 mA 14 U / 71 mm 3 U / 133 mm 170 mm 1,2 kg HCE 35 - 3500 0 - 3500 V 0 - 10 mA 21 U / 107 mm 3 U / 133 mm 170 mm 1,5 kg HCE 140 - 3500 0 - 3500 V 0 - 40 mA 21 U / 107 mm 6 U / 262 mm 230 mm 3,0 kg HCE 350 - 3500 0 - 3500 V 0 - 100 mA 28 U / 142 mm 6
Capacitor charging power supplies Series HCK from 2 kV to 65 kV / 100 J/s to 20 kJ/s Setting range for the charging Design example HCK 200 - 12500 12500V / 30mA Features: Efficiency approx. 90% In units of 20kV and higher, the HV-components are moulded in (removable) silicon resin. From 35kV / 5000J/ s on, the HV-components are isolated in oil Continuous charging or triggered charging via potential free external trigger input selectable (opto-coupler input for 12 - 24V).
Capacitor charging power supplies Series HCK from 2 kV to 65 kV / 100 J/s to 20 kJ/s Type Voltage Current Charg. pow.
Capacitor charging power supplies Series HCK from 2 kV to 65 kV / 100 J/s to 20 kJ/s HCK 5000 - 12500 12,5kV / 800mA HCK 6750M - 30000 (side cover removed) 30kV / 450mA (650mA up to 15kV) HCK 150000M - 12000 12kV / to 35A customer specific design, 4-fould 19“ cabinet, cubical Design examples Type Voltage Current Charg. pow.
Power supplies for superconducting coils Series NTS to 65 V / to 10000 A Design: Up to 200A (or approx. 2.5 kW) in 19’’ table-top cases or plug-in units. Units with higher current or power are supplied as 19" cabinets on roller blades. The side panels can be removed, the rear door can be locked. All cabinets have removable crane-eyes. Output: Output isolation: The output is floating. Operating voltage with respect to earth: for air cooled units max. ±300V DC, for water cooled units max.
Power supplies for superconducting coils Series NTS to 65 V / to 10000 A Design examples NTS 720 - 8 mod. 8V / 90A customer specific design for high temperature super conductor NTS 20000M - 10 10V / 2000A NTS 250000M - 50 50V / 5000A 34 © V 0913 FuG Elektronik GmbH, D-83135 Schechen, Am Eschengrund 11 http://www.fug-elektronik.de, E-Mail: info@fug-elektronik.
Linear regulated power supplies unipolar Series NLN from 6,5 V to 500 V / 35 W to 1400 W The following data applies for voltage and current regulation, and refers to the rated value (unless otherwise stated): (For explanations please refer to Definitions and Terms from page 54.) Setting range: from approx.
Linear regulated power supplies unipolar Series NLN from 6,5 V to 500 V / 35 W to 1400 W Design example NLN 700 - 250 250V / 2,8A Customised design (Non standard voltage/ current prepared for 19“ build-in) Type Voltage Current Width Height Depth Weight NLN 35 - 6,5 0 - 6,5 V 0 - 5 A ½19" / 222 mm 3 U / 133 mm 350 mm 5 kg NLN 140 - 6,5 0 - 6,5 V 0 - 10 A 19" / 443 mm 3 U / 133 mm 350 mm 10 kg NLN 350 - 6,5 0 - 6,5 V 0 - 30 A 19" / 443 mm 4 U / 177 mm 450 mm 19 kg NLN 70
Linear regulated power supplies unipolar Series NLN from 6,5 V to 500 V / 35 W to 1400 W Design example Customer specific special versions NLN 3000M - 10 10V / 300A In rel.
Linear regulated power supplies bipolar Series NLB from ±6,5 V to ±350 V / 35 W to 1400 W Design example NLB 350 - 20 ± 20V / ± 15A The following data applies for voltage and current regulation, and refers to the rated value (unless otherwise stated): (For explanations please refer to Definitions and Terms on page 54.) Setting range: from -100% to +100% Setting resolution: Features: Single output power supply with adjustable bipolar output voltage and current. Instantaneous change of polarity.
Linear regulated power supplies bipolar Series NLB from ±6,5 V to ±350 V / 35 W to 1400 W Type Voltage Current Width Height Depth Weight NLB 35 - 6,5 0 - ±6,5 V 0 - ±5 A 19" / 443 mm 4 U / 177 mm 450 mm 9 kg NLB 140 - 6,5 0 - ±6,5 V 0 - ±10 A 19" / 443 mm 4 U / 177 mm 450 mm 12 kg NLB 350 - 6,5 0 - ±6,5 V 0 - ±30 A 19" / 443 mm 4 U / 177 mm 550 mm 22 kg NLB 700 - 6,5 0 - ±6,5 V 0 - ±60 A 19" / 443 mm 8 U / 355 mm 550 mm 35 kg NLB 1400 - 6,5 0 - ±6,5 V 0 -
Linear regulated power supplies bipolar Series NLB from ±6,5 V to ±350 V / 35 W to 1400 W Type Voltage Current NLB 35 - 125 0 - ±125 V 0 - NLB 140 - 125 0 - ±125 V NLB 350 - 125 0 - ±125 V NLB 700 - 125 0 - ±125 V NLB 1400 - 125 0 - ±125 V NLB 35 - 200 0 - NLB 140 - 200 0 - NLB 350 - 200 NLB 700 - 200 NLB Width Height Depth Weight ±250 mA 19" / 443 mm 4 U / 177 mm 450 mm 9 kg 0 - ±1 A 19" / 443 mm 4 U / 177 mm 450 mm 12 kg 0 - ±2,5 A 19" / 443 mm 4 U / 17
Bipolar high voltage power supplies Series HCB from ±1250 V to ±20000 V / 1,4 W to 200 W Design example HCB 7 - 6500 ± 6500V / ± 1mA Features: Light-weight In units with 6,5kV and higher the HV-components are moulded in (removable) silicon resin Short-circuit and flash over proof.
Bipolar high voltage power supplies Series HCB from ±1250 V to ±20000 V / 1,4 W to 200 W Type Voltage Current Width Height Depth Weight HCB 1,4 - 1250 0 - ±1250 V 0 - ±1 mA 19" / 443 mm 3 U / 133 mm 350 mm 6 kg HCB 14 - 1250 0 - ±1250 V 0 - ±10 mA 19" / 443 mm 3 U / 133 mm 350 mm 7 kg HCB 2 - 2000 0 - ±2000 V 0 - ±1 mA 19" / 443 mm 3 U / 133 mm 350 mm 6 kg HCB 20 - 2000 0 - ±2000 V 0 - ±10 mA 19" / 443 mm 3 U / 133 mm 350 mm 9 kg HCB 3,5 - 3500 0 - ±3500 V
Technical Appendix Mains Fuses, Connected Wattage Type Range Power Class [W] Voltage Range Efficiency Mains Fuse (Automaten) NTN NYN / MYN / HYN NCA / MCA MCP HCP HCH HCK 4.200 6,5V upto20V 25A 7.000 6,5V upto 20V 25A 10.500 6,5V upto20V 32A 14.000 6,5V upto 20V 21.000 6,5V upto20V 28.000 6,5V upto 20V typ. 70-80% 32A For design of your electricity supply please provide the next higher rated value of the main fuses used inside the unit.
Options and modifications: Analog programming Many FuG- power supplies are available which differ from the standard design or equipment. On this pages we highlight some of the most common options and modifications. Other customer-specific units having different technical data, different mechanical construction, alternative customer defined interfaces or with extended features are available even for single piece orders.
Options and modifications: Analog programming Application notes for the analog programming: Only external ON / OFF, front side potentiometers stay active: 12 Read signals in local mode: 6 5 15 4 g ood 1 A Link from pin 12 to pin 6 releases the output, a disconnection between these pins locks it. The link can be made by switch, relay contact, wire link, transistor or opto-coupler output (care for correct polarity in the last two cases).
Options and modifications: Probus V (digital interface system) Design example Interface converter Profibus DP ADDA - module General: The modular interface system PROBUS V allows to connect FuG- power supplies with various interfaces and bussystems. The PROBUS V system consist of two assemblies, the ADDA module and an interface converter respectively. The ADDA module is an intelligent analog-digital and digitalanalog converter for controlling the power supply.
Options and modifications: Probus V (digital interface system) RS 422: Baud rates up to 625kBd possible. Optical connectors: Standard Agilent (HP) HFBR-0500 series. Optionally HFBR-0400 series. USB: Control via virtual COM-Port or directly via USB-driver. (Virtual Com-Port driver for the most common operation systems available, very simple programming, no USBprogramming knowledge necessary.) Delay time typical approx.1ms due to USB principle.
Options and modifications: Further possibilities Polarity reversal: By this switch the output voltage polarity of a high voltage power supply (Nearly all of the HCP, HCK or HYN types) can be changed. With HCP up to 35kV it is possible to remote control the polarity change if the units are equipped additionally with an analog programming or with digital interface. For the most models the polarity reversal can be installed later at our site.
Accessories: Isolating transformers Design examples HTS 200 - 50 Function: Technical data: Input voltage: 230V 47 - 63Hz Output voltage: 230V 47 - 63Hz Isolation: primary / secondary: 50kV DC Test voltage: 75kV DC for 1 min. Test voltage between primary winding, primary screen and core: 7.5kV DC Test voltage between secondary winding and secondary screen: 7,5kV DC High voltage isolating transformers are used to provide mains supply to loads located on a high voltage potential.
Accessories: Mechanical components Rack adapters We offer rack adapters for the installation of all FuG- tabletop models into 19" systems. They are available for mounting heights from 2U to 9U and both for 19” and for ½ 19" units.
Accessories: High voltage cables Type Design (Diameter in mm) RG 58 Mat.- Nr.: 0502030100 Capacitance/m: Impedance: Ambient temperature: Bending radius: Max. current: 101pF 50W -50°C … +80°C 10cm (repeated) 2,5cm (once) max. 10A 130660 Mat.- Nr.: 0502030130 Capacitance/m: Impedance: Ambient temperature: Bending radius: Max. current: 82,7pF 20W -5°C … +85°C 20cm (repeated) 3cm (once) max.4A RG 11 Mat.- Nr.: 0502030200 Capacitance/m: Impedance: Ambient temperature: Bending radius: Max.
Accessories: High voltage sockets SHV– panel connector RA 3415 HB 21 RA 3430 B 150 52 © V 0913 FuG Elektronik GmbH, D-83135 Schechen, Am Eschengrund 11 http://www.fug-elektronik.de, E-Mail: info@fug-elektronik.
Accessories: High voltage connectors Provided plugs and matching cables for FuG power supplies For all medium and high voltage power supplies, the appropriate output connectors , as mentioned in the table (excluding banana plugs) are included in the delivery of the unit . Additional connectors (as shown in page 51) can be delivered on request. SHV- cable jack For power supply types, not listed in the below table, the output will be designed with special high voltage sockets, chopper bars or clamps.
Definitions and Terms Absolute accuracy The stated figure refers to the absolute deviation of the DVM, or of the monitors of the analog programming. They are independent of the stability data of the individual series.
Definitions and Terms Nominal voltage Maximum adjustable voltage. For FuG- power supplies the second number in the type name is usually the nominal voltage of the power supply. Operational conditions As far as not otherwise stated in the manual, for Fug power supplies the following conditions are valid: Temperature: 0 to +40 °C Humidity: 0 to 85% not condensing Height over sea level: max.
Examples for customer specific power supplies: We design and manufacture according to your requests! MCP 140 - 2000 Medium voltage precision power supply Equipped with the options: coarse/fine potentiometers for voltage and current, digital interface, analog programming and power limitation. HCV 3,1M - 12000 Power supply for VUVSpectrometer 3 outputs in series: 0 - ±100V; 0 - 1mA 0 - +2000V; 0 - 1mA 0 - +10000V; max.
Examples for customer specific power supplies: We design and manufacture according to your requests! MCP 1100 - 1100 Power supply for undersea applications 0 - 1,1kV, 0 - 1A With two separate switchable outputs, isolated and monitored, Wide input range 85V - 265V HCV 349M - 6500 High voltage supply for backward wave tube 0 - 6,5kV, 0 - 50mA With floating heater supply Special design for airborne use (vibration hard) HCE 2,4M - 12000 Customer specific high voltage module 0 - 12kV, max.
Examples for customer specific power supplies: We design and manufacture according to your requests! HCK 800M - 13000 Cable Tester 13kV / 120mA Many special functions HCN 12900M - 300000 High voltage power supply 300kV, 60mA (Fold back to 35mA at full voltage) Two additional 12.
Examples for customer specific power supplies: We design and manufacture according to your requests! HCV 4200M - 400000 Double High voltage power supply for X-Ray tube Two symmetrical outputs: 0 to +200kV und 0 to -200kV. Additional output for anode heater, floating on negative output potential. Regulation loops for voltage control, current control and emission current control. (Regulation loop is closed via filament current .
