Wi-Fi Connection Guide

EN-7
ENGLISH
6.
Please input SSID and password of
the router then tap “NEXT”.
7.
If following screen displays and
Wi-Fi indicator turns ON, your air
purifier has successfully connected
to the router.
• It may take a few minutes to complete the
connection settings.
• If the connection settings cannot be
completed, your air puri er will beep 4 times
and the Wi-Fi indicator light will be o󰀨 . In
that case, please try again from Step 1 on
page 5.
8.
Once connected, press POWER ON/
OFF button on your air purifi er, and
tap “NEXT”.
iOS Devices
4.
1 Select Wi-Fi setting of your iOS
device.
2 Select “AP-SHARP-XX”.
•
XX is the last two letters of
the MAC address. Please refer
to Page 20 of the air purifier
Operation Manual when you want
to check the MAC address of your
air purifer.
3 Once connected to AP-SHARP-XX,
return to the Sharp Air application.
5.
Please confi rm the model name of
the air purifi er you want to connect
with router, then tap “NEXT”.
××
Page 8, Step 3
2
CONNECTION OF THE AIR PURIFIER AND A ROUTER
(B) The Wi-Fi Protected Setup (WPS) button function is not available on the router.
FX-J80U_Wi-Fi_EN.indd 7 2019/10/25 14:10:26