User guide

ENGLISH

Press the TIMER ON ( ) button.

The TIMER ON indicator will blink; press the TIME

ADVANCE or REVERSE buttons to set the de-

sired time. (The time can be set in 10-minute

increments.)

Point the remote control at the signal receiver

window on the unit and press the TIMER SET

(SET/C) button.

• The orange TIMER lamp ( ) on the unit will light.

• The unit will generate a beep when it receives the

signal.

Select the operation condition.

• If unit(s) is/are operated in one mode while TIMER

ON is set with another unit in different mode, the

timer may not activate the required operation.

• The unit will turn on prior to the set timer to allow the

room to reach the desired temperature by the pro-

grammed time. (Awaking function)

Example:

To stop operation at 11:00 p.m. and resume operation

(With the same mode and temperature settings) to turn

on the unit by 7:00 a.m.

Set the TIMER OFF to 11:00 p.m. during operation.

Set the TIMER ON to 7:00 a.m.

The arrow (

or ) between the TIMER ON indicator

and the TIMER OFF indicator shows which timer will

activate first.

E-13

NOTES:

• You cannot programme the ON-TIMER and OFF-TIMER to operate the unit at different tempera-

tures or other settings.

• Either timer can be programmed to activate prior the other.

You can use the ON and OFF timers in combination.

COMBINED USE OF ON AND OFF TIMERS

TIMER ON

SWING

FAN

MODE

SET/C