User's Manual

7www.sharkclean.com
ASSEMBLY
1 Remove all packaging from the
appliance. Do not plug in or turn
on until assembly is complete.
2 Set the base on the floor and
insert the telescoping pole, align
the groove of the pole with the
arrow on the base. Turn the pole
connector clockwise to secure.
(fig. 1)
3 Attach the steam nozzle cradle
to the top of the telescoping pole
and gently press down on the
cradle. The garment hook should
face away from the front of the
base. (fig. 2)
4 Pull the release button (3) on the
base towards you. (2) Holding
the unit at a slight angle align
the slot on the front of the unit
with the base rib and insert it into
the base. (1) Then push down
to engage the latch. Then push
the release button in to lock it in
place. (fig. 3)
5 Align the notch on the inside of
the hose connector to the steam
unit and turn the connector
clockwise to secure the hose to
the steamer. (fig. 4)
NOTE: The hose will remain stiff
until heated.
ENGLISH
6 Hang the steam nozzle on the
steam nozzle cradle.
7 Adjust the telescoping pole to the
desired height by unlocking the
three latches one by one. Extend
the pole to the appropriate height,
then lock the latch back in place
to secure.
fig. 1
fig. 4
fig. 2
fig. 3
2
3
1