User guide

112 Settings
• “CSD Settings”: Bearer connection type
“Phone No.”*: Access point number
“Line Type”: ISDN or analogue
“Username”: Username
“Password”: Password
“Linger Time”: Linger time (0-99999 sec.)
To Activate the WAP/MMS Profile
“Settings”
→ “Network Settings”
1. Select from “WAP Settings” or “MMS Settings”.
2. Highlight the desired profile.
3. Press [Options] and select “Activate”.
To Edit the WAP/MMS Profile
“Settings”
→ “Network Settings”
1. Select from “WAP Settings” or “MMS Settings”.
2. Highlight the desired profile.
3. Press [Options] and select “Edit”.
4. Edit the desired item and select [Save].
To Copy the WAP/MMS Profile
“Settings”
→ “Network Settings”
1. Select from “WAP Settings” or “MMS Settings”.
2. Highlight the desired profile.
3. Press [Options] and select “Copy”.
4. Edit the new profile name.
To Delete the WAP/MMS Profile
“Settings”
→ “Network Settings”
1. Select from “WAP Settings” or “MMS Settings”.
2. Highlight the desired profile.
3. Press [Options] and select “Delete”.
Security
PIN Entry
If the PIN code is enabled you are asked to enter the
PIN code each time the phone is switched on. Your PIN
code is stored on the SIM card and you should have
been made aware of the code when you purchased the
SIM card. Contact your service provider for further
details.
“Settings”
→ “Security” → “PIN Entry”
1. Select “On” to enable the PIN code.
Select “Off” to disable it.
2. Enter your PIN code.
(M 9-7)