Operation Manual

Settings 92
6. Select a ringing tone.
For details on selecting a ringing tone, see “Ringer
Type” on page 64.
7. Press or to select “Vibration”, then press
.
8. Press or to select “Enable”, “Disable” or
“Link to Sound”, then press .
For details on setting the vibration, see “Vibration”
on page 65.
9. When setting is complete, select “Setup End”, then
press .
Tip
• To cancel the ringing tone setting, select “Off” in
step 4.
Auto Redial (M 7-2-6)
See “Automatic Redialling” on page 20 about this
function.
Minute Minder (M 7-2-7)
Minute Minder function informs you of your talk time
by sounding a tone after every minute.
1. Perform steps 1 to 3 in “Call Waiting” on page 89.
2. Press or to select “Minute Minder”, then
press .
3. Press or to select “On” or “Off”, then press
.
Call Setting Reset (M 7-2-8)
The call settings can be reset to their default settings.
1. Perform steps 1 to 3 in “Call Waiting” on page 89.
2. Press or to select “Set to Default”, then
press .
3. Enter your handset code, then press .
4. Press or to select “Yes”, then press .
To cancel resetting, select “No” at step 4, then press
.
All call settings are reset.
Note
• If you enter the wrong handset code in step 3, the
operation is cancelled and the screen returns to step
3 in “Call Waiting” on page 89.