Operation Manual

115 Messages
3. Select the message format by pressing or ,
then press .
Connection Type
1. Perform steps 1 to 3 in “Setting up SMS” on page 114.
2. Press or to select “Connection Type”, then
press .
3. Select the connection type by pressing or ,
then press .
Optimisation
When set “On” (default), double-byte characters such
as European characters with an accent will be converted
into single-byte characters and sent.
When “Off”, double-byte characters will be sent as
displayed.
Please note that you may be charged double for double-
byte characters sent in an SMS when Optimisation is set
“Off”.
1. Perform steps 1 to 3 in “Setting up SMS” on page 114.
2. Press or to select “Optimisation”, then press
.
3. Press or to select “On” or “Off”, then press
.
Creating a New SMS
1. Press [ ] during stand-by.
2. Press or to select “SMS”, then press .
3. Select “Compose”, then press .
4. Enter your message.
For details on entering characters, see “Entering
Characters” on page 24.
5. Press .
To Use the Text Template
1. Perform steps 1 to 3 in “Creating a New SMS”.
2. Press [Options] to display the Options Menu.
3. Press or to select “Insert Template”, then
press .
4. Select the desired template from the list by pressing
or , then press .
To Save the Message in the Outbox
1. Perform steps 1 to 5 in “Creating a New SMS”.
2. Enter the SMS phone number of the recipient, then
press .
3. Press or to select “Save”, then press .
(M 0-2-1)