Operation Manual

49 Fun & Games
Backlight
You can select the method of backlight during the
operation of the Java™
application from the following
three types:
• “On”: Lit whilst the Java™
application is operated.
• “Off”: Unlit whilst the Java™
application is operated
even if a key is pressed.
• “Normal Settings”:Works with the main backlight
setting. (p. 85)
1. Perform steps 1 to 4 in “Operation Priority” on
page 48.
2. Press or to select “Backlight”, then press
.
3. Select “On/Off”, then press .
4. Select “On”, “Off” or “Normal Settings” by
pressing or , then press .
To Set the Blinking Operation
You can set whether the blinking operation, which is
embedded in Java™
application, is enabled.
1. Perform steps 1 and 2 in “Backlight”.
2. Press or to select “Blink”, then press .
3. Select “On” or “Off” by pressing or , then
press .
Vibration
When vibrator is set in the Java™ application, you can
choose whether the operation is enabled or disabled.
When a SMAF file is specified in the Java™
application, you can operate the vibrator set in the
SMAF file.
Note
• SMAF (Synthetic music Mobile Application Format)
is a format of music data for mobile phones.
1. Perform steps 1 to 4 in “Operation Priority” on
page 48.
2. Press or to select “Vibration”, then press
.
3. Press or to select “Enable”, “Disable” or
“Link to Sound”, then press .
When you set “Link to Sound”, the Java™
application is syncronised with the vibrator.