Operation Manual

87 Settings
Setting the Greeting Message (M 7-1-6)
You can set the message which will appear when the
phone is turned on.
1. Perform steps 1 to 3 in “Changing the Language” on
page 84.
2. Press or to select “Greeting Message”, then
press .
3. Press or to select “On”, then press .
4. Enter the message, then press .
Up to 16 characters can be stored as a message.
For details on entering characters, see “Entering
Characters” on page 24.
Tip
• To cancel the Greeting Message setting, select “Off”
in step 3.
Assign Pictures (M 7-1-7)
Pictures/images can be displayed when turning the
power on or off, when receiving an incoming call, or
when operating the alarm.
Pictures taken by a digital camera or images
downloaded from a WAP site can be used.
To Set Built-in Pictures/Images
1. Perform steps 1 to 3 in “Changing the Language” on
page 84.
2. Press or to select “Assign Pictures”, then
press .
3. Select the screen to set the picture/image by
pressing or , then press .
4. Select “Animation 1” or “Animation 2” by pressing
or , then press .
or
Select “Illustration 1” or “Illustration 2” by pressing
or , then press when you select “Alarm”
in step 3.
The selected picture/image is displayed.
5. Press .
Tip
• To cancel the picture/image setting, select “Off” in
step 4.
To Set My Pictures
1. Perform steps 1 to 3 in “To Set Built-in Pictures/
Images”.
2. Press or to select “My Pictures”, then press
.
The file name of the pictures/images that are
registered in the Saved Pictures is displayed.