Operation Manual

91 Settings
Personal Call (M 7-2-4)
A specified ring tone or vibrator setting can be
associated to a pre-registered phone number.
Up to 20 phone numbers can be registered.
1. Perform steps 1 to 3 in “Call Waiting” on page 89.
2. Press or to select “Personal Call”, then press
.
3. Select the number you wish to set by pressing or
, then press .
4. Enter the phone number, then press .
If you wish to select the phone number in the
Phonebook, search for the desired Phonebook entry.
Press or [Search] to search the number
by name or press or to search in alphabetical
order, then press . For details on searching the
Phonebook entries, see “Finding a Name and
Number” on page 28.
5. Press or to select “Assign Melody”, then
press .
6. Select a ring tone.
For details on selecting a ring tone, see “Ringer
Type” on page 64.
7. Press or to select “Vibration”, then press
.
8. Press or to select “Enable”, “Disable” or
“Link to Sound”, then press .
For details on setting the vibrator, see “Vibration”
on page 65.
9. When setting is complete, select “Setup End”, then
press .
Group Call (M 7-2-5)
Phone numbers can be registered or updated in groups.
To Set Group Ring Tone
Different ring tones can be set for each group.
When you purchase this phone, groups are set to off.
If you do not set a group ring tone the default ring tone
will be used.
1. Perform steps 1 to 3 in “Call Waiting” on page 89.
2. Press or to select “Group Call”, then press
.
3. Select the group you want to set by pressing
or , then press .
4. Press or to select “On”, then press .
5. Press or to select “Assign Melody”, then
press .