Declaration of Conformity Hereby, Sharp Telecommunications of Europe Ltd declares that this GX10i is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. A copy of the original declaration of conformity can be found at the following Internet address: http://www.sharp-mobile.com Introduction Congratulations and thank you for choosing the GX10i.
• Screen layout illustrated in this user guide may differ from the actual one. The information described in this user guide is subject to change without notice. • Not all the functions described in this user guide may be supported in all networks. • We assume no responsibility for downloaded contents, information, etc. from network. Copyright According to copyright laws, the reproduction, alteration and use of material which is protected by copyright (music, pictures, etc.
Licensed under U.S. Patent 4,558,302 and foreign counterparts. T9 Text input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/DK, Fl, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat. Nos.
Table of Contents Introduction ................................................. 1 Useful functions and services of the phone ..3 Table of Contents ........................................ 4 Your Phone .................................................. 7 Accessories ..................................................7 Getting Started ............................................ 8 Inserting the SIM Card and the Battery .....10 Charging the Battery ..................................
Memory Status .......................................... 47 Fun & Games ............................................. 48 Java™ Games ............................................48 Other Games ............................................. 51 Melody Editor ........................................... 52 Tone Editor ............................................... 59 Profiles ...................................................... 63 Activating a Profile ....................................
Cell Information ......................................119 Data Transmission .................................. 120 System Requirements ...............................120 Software Installation and Setup ...............120 Using the Modem Setup ...........................120 Transmitting Picture/Image Files .............121 Troubleshooting ...................................... 122 Safety Precautions and Conditions of Use ............................................................ 124 CONDITIONS OF USE ....
Your Phone Please check the following carefully. Your phone should come complete with: • GSM 900/1800/1900 GPRS handset • Rechargeable Li-ion battery • AC charger • Hands free kit • CD-ROM • User guide Accessories (optional) • • • • Li-ion spare battery (XN-1BT11) Cigarette lighter charger (XN-1CL10) Car holder (XN-1CH11) Data cable (RS232C cable: XN-1DC10) Some of the above accessories may not be offered by every region. For details, please contact your dealer.
Getting Started Getting Started 8
1. Earpiece 2. Navigation Keys (Arrow Keys): Move the cursor to select menu items, adjust the earpiece volume, etc. Up/Down arrow keys: Search the Phonebook entries in stand-by mode. Left arrow key: Adjusts the earpiece volume in stand-by mode. Right arrow key: Displays the Phonebook menu in stand-by mode. 3. Centre Key: Displays the Main Menu and executes the functions. in this manual indicates this key. 4. Left Soft Key: Executes the function at the bottom left on the screen. 5.
Inserting the SIM Card and the Battery 2. Slide the SIM card into the SIM holder. 1. Slide off the battery cover.
3. Hold the battery so that the metal contacts of the battery are facing down, slide the guides on the top of the battery into the battery slots , and then insert it . 4. Replace the battery cover so that the marks are aligned and slide it as shown. Note • Make sure that only 3V SIM cards are used. • Use only the approved battery (XN-1BT11).
Removing the SIM Card and the Battery 1. Make sure to turn off your phone and disconnect charger and other accessories. Slide off the battery cover. 3. Slide the SIM card by pushing the back of the card and remove it from the SIM holder. 2. Pick up the battery using the protruding edge and remove the battery from the phone.
Battery Disposal The device is supported by a battery. In order to protect the environment, please read the following points concerning battery disposal: • Take the used battery to your local waste depot, dealer or customer service centre for recycling. • Do not expose the used battery to an open flame, put into water or dispose with the household waste. To Charge Using the Charger 1.
To disconnect the charger Push and hold the side buttons of the charger, then disconnect the charger from the external socket of the phone. 2. When charging is complete, the LED indicator turns off. Unplug the charger from the AC outlet, then unplug the charger connector from the phone. Note • Do not use any non approved charger, this may damage your phone and invalidate any warranty, please see “Battery” on page 125 for details.
Turning Your Phone On and Off To turn the power on, press and hold approximately 2 seconds. The stand-by screen appears. To turn the power off, press and hold approximately 2 seconds. Display Indicators for Status Indicators for Entering the PIN Code If activated you will be asked to enter a PIN (Personal Identification Number) code after turning on your phone. 1. Enter your PIN code. 2. Press . Note • If your PIN code is entered incorrectly three times in a row, the SIM card is locked.
1. 2. / : : 3. / / Indicates the strength of received signal/the service is out of range. 11. Appears when in call. 12. : Appears when your phone is in data communication mode. 13. : Appears when your phone is in fax communication mode. / : Indicates the input mode (Upper case only the first letter of the word mode/ Upper case mode/Lower case mode/ Numeric mode). Appears when your phone is roaming outside of your network. 14. : Appears when your phone is GPRS enabled and within range.
20. (No display)/ 21. : 22. 23. 24. / / / : Indicates the phone’s mode (Normal mode/Meeting mode/Activity mode/ Car mode/Silent mode). Status Indicators Status Indicators Appears when a voicemail message is stored. : / / : Appears when up, down, right or left navigation is available. : Appears when “Infrared” is on/during connection. 1. : Indicates the received signal strength. 2. : Appears when GPRS is within range and can be used. Flashes during in GPRS communication mode. 3.
8. : Appears when the data cable is connected to your phone. 9. : Appears when “Ringer Volume” (p. 64) is set to “Silent”.
Call Functions Making a Call 1. Enter the area code and the phone number you wish to dial. If you enter the wrong number, press [Clear] to delete the number to the left of the cursor. 2. Press to dial. Emergency Calls 1. Enter 112 (international emergency number) using the keypad. 2. Press to dial. Note • Emergency calls may not be available on all mobile phone networks when certain network services and/ or phone features are in use. Contact your network operator for more information.
Redialling 5. Select “On” to enable the Auto Redial function or You can redial the numbers in the call log list that you may have missed, received or dialled. Each list can contain up to 10 numbers. 1. Press during stand-by. 2. Press or to select a category between “Dialled Numbers”, “Missed Calls” and “Received Calls”. Note • When you receive an incoming call, the Auto Redial function will be interrupted. • Automatic redialling is not available for fax and data calls. 3.
Tip • When the hands free kit is connected to the phone, you can answer calls by pressing the Side keys (up or down). • If you have subscribed to the Calling Line Identification (CLI) service and the caller’s network sends the number, the caller’s number will appear on the screen. If the caller’s name and number are stored in the Phonebook, the caller’s name will appear on the screen. • If the number is a restricted number, the display shows “Withheld”.
3. Enter the phone number you wish to make another call to, then press . Tip • You can also make another call by entering the phone number during a call instead of steps 1 and 2. The current call is automatically put on hold. Call Waiting This service notifies you of another incoming call whilst you have a call in progress. 1. During a call, press [Answer] to answer the second call. The first call is put on hold and you can now talk to the second caller. 2.
[Options] to display the Options Menu. To Have a Private Conversation with one of the participants If you wish to have a private conversation with one of the participants, you may select the participant from the conference list and put the other participants on hold. 1. During the conference call, select the person that you wish to talk to by pressing or . 2. Press [Options] to display the Options Menu. or 3. Press Adding New Participants to the Conference Call 1.
Phonebook Key You can store the phone numbers and E-mail addresses of your friends, family and colleagues in the Phonebook. Lower Case Characters Upper Case Characters Numeric JKL5 jkl5 5 PQRS7 pqrs7ß 7 Entering Characters WXYZ9ÝÞ wxyz9ýþ When entering characters to create Phonebook entries, SMS or MMS, etc., press the corresponding keys. (space)+ = < > 6 Group name (p. 26) You can classify the phone numbers and names stored in the Phonebook, such as “Family” and “Business”.
Changing the Input Mode To change the input mode, press approximately 2 seconds. for T9 Text Input T9 text input method is a shortcut to enter text easily and quickly. 1. Press and hold until “ ” is displayed. 2. Press each key once for any letter you require on that key. To enter the word “How”, press . 3. Press or until the correct word is shown if the character combination, that was initially displayed, is not correct. 4. Press to select the word.
3. Press or to select “Save Nos. to”, then press . 4. Select “SIM Card” to store the entry on the SIM memory or “Phone Memory” by pressing or , then press . When selecting “Choice”, you can choose SIM card or phone memory every time you store a new Phonebook entry. Storing Names and Numbers 1. Press to display the Phonebook menu. 2. Press or to select “Add New Name”, then press . 3.
Entering E-mail Address 3. Press or to highlight the right side of “ ”, then press . 9. Specify the range for displaying the picture/image 4. Enter the E-mail address, then press Note • The stored picture/image is automatically saved under the “in Phonebook” section of the Saved Pictures. • The picture/image cannot be deleted in the Saved Pictures. Remove the picture/image data from the Phonebook. by pressing 10. Press . Up to 60 characters can be entered.
Finding a Name and Number Two methods of searching through the Phonebook are available: Search by Name 1. Press to display the Phonebook menu. 2. Select “View Names”, then press . Tip • If you press and select “Search” after step 2, you can also search the name and number. • You can also dial the desired phone number by pressing the digit key corresponding to the list number instead of step 6. Search in Alphabetical Order or whilst in stand-by to open the Phonebook. 2.
5. Edit entry as required. 6. Press . 3. Press If you wish to edit another item, repeat steps 4 to 6. [Save] to save the change(s). 7. Press Deleting Phonebook Entries 1. Search for the desired Phonebook entries. For details on searching through Phonebook entries, see “Finding a Name and Number” on page 28. 2. Press . 3. Press or to select “Delete”, then press 4. Select “Yes”, then press . Note • “Data” or “Fax” may not be displayed depending on SIM card. Editing Your Phone Numbers 1.
4. Select a desired group name by pressing . “ ” indicates that the group has been selected. To cancel the selected group, press again. The checkbox becomes blank again. Memory Status This function helps you to check the number of entries stored in the Phonebook. 1. Press to display the Phonebook menu. 2. Press or to select “Settings”, then press . 3. Press press or . to select “Memory Status”, then You can check the following memory status.
Sending Messages 1. Search for the desired Phonebook entries. For details on searching through Phonebook entries, see steps 1 to 4 in “Search by Name” on page 28. 2. Press or to highlight the right side of “ ”, “ ” or “ ”, then press or Press or to highlight the right side of “ ”, then press . 3. Press or to select “Send Message”, then press . If you highlight the right side of “ ”, “ ” or “ ” in step 2: 4. Press or to select “MMS” or “SMS”, then press . 5. Enter your message.
Using the Menu Using the Main Menu 1. Press during stand-by mode. 2. Press or to navigate to required location. 3. Press or to access function. To Select Another Item within the Main Menu To return to the previous screen after selecting a function from the Main Menu or Sub Menu, press . Every time you press , the screen goes back one by one. Example: To access “Language” Sub Menu using shortcut keys Press . Note • The shortcut keys work for the first three menu levels only.
List of Menu Functions Menu No./ Main Menu Menu No./ Sub Menu1 Menu No.
Camera ( M 1) 4. Press Your phone incorporates an integrated digital camera. This allows you to take and send pictures wherever you are. Tip • To leave Camera Mode without registering the taken picture after step 2 in “Taking Pictures”: Press and select “Yes”, then press . • To take a picture of yourself, press or the Side keys (up or down) whilst checking the image reflected on the mirror on the back of the phone. Place/Hold the phone at least 40 cm away from yourself.
To select the mode 1. Press [Options] before step 2 in “Taking Pictures” on page 34 to display the Options Menu. 2. Press or to select “Select Mode”, then press . 3. Select the mode by pressing or , then press . Note • Vertical stripes may be reflected to a picture by light source. Change the mode in this case. In the Case of No Available Memory When the number of pictures that can be taken becomes 5 or less, or when the remaining capacity becomes 27.
Mode indicator (p. 35) : Mode 1 : Mode 2 Making Adjustments According to Lighting Conditions Adjusting the Brightness of the Picture Adjust the brightness of the picture by pressing or . Once the phone has returned to the stand-by screen the brightness settings return to default. Viewing the Taken Pictures The taken pictures can be viewed in the Saved Pictures. 1. In camera mode, press [Options]. The Options Menu is displayed. 2. Select “Existing Pictures”, then press .
Note • Whilst the delay timer is operating, the LED indicator and the icon flash. • If is pressed whilst the delay timer is operating, the picture is taken instantly. • If there is an incoming call or alarm functioning, or is pressed, whilst the delay timer is operating, the camera operation is cancelled. In this case, the timer setting is cancelled. • The zooming function with [Zoom] / [Wide], or the adjustment of brightness of the picture with or , is unavailable whilst the delay timer is operating.
My Phone Downloading JavaTM Applications My Phone contains several types of picture/image and sound data along with JavaTM applications which can be controlled collectively. Also included in My Phone are frequently used text message phrases and accessed WAP pages (addresses) which you can use and edit. Confirmation screen Before downloading the JavaTM application you will be asked to confirm what you are about to receive.
6. Press [Get]. Downloading starts. 7. Press [OK] even if it carries out complete. My Java™ Games (M 2-1) Along with the preloaded JavaTM application, downloaded applications are stored in the Saved Games. Your phone has one preloaded JavaTM application. Note • The phone can store approximately 700Kbytes of information across the Saved Games, Saved Pictures and Saved Sounds. The Saved Games can store up to 50 applications. Executing Java™ Applications 1. Press to display the Main Menu. 2.
3. Select “File Information”, then press . The detailed information screen is displayed. 4. Press or to scroll through the screen. 5. When you have finished, press [Back] twice. The screen returns to the Saved Games. Deleting JavaTM Applications 1. Perform steps 1 to 4 in “Executing Java™ Applications” on page 39. 2. Select the JavaTM application you wish to delete, then press [Options]. The Options Menu is displayed. 3. Press or to select “Delete”, then press . 4. Select “Yes”, then press .
Viewing Pictures/Images 1. Press to display the Main Menu. 2. Press or to select “My Phone”, then press . 3. Select “My Pictures”, then press . 4. Select “Saved Pictures”, then press . The list of Saved Pictures is displayed. 5. Select the file name you wish to view by pressing or , then press . The selected picture/image is displayed. 6. Once you have confirmed the picture/image, press [Back] to return to the Saved Pictures.
2. Select the file name you wish to adjust by pressing or , then press [Options]. The Options Menu is displayed. 3. Press or to select “Adjust Size”, then press . 4. Select the picture/image size you wish to change by pressing or , then press . 5. Specify the range for displaying the picture/image by pressing , , or then press . 6. Press . To cancel registration, press [Back] at any time before step 6. Note • “Adjust Size” may not be available depending on the picture/image original and copyright issued.
My Sounds (M 2-3) The ring tones instead created by Melody Editor and the WAVE data recorded by Voice Memo are managed in the Saved Sounds. Default ring tones are not contained. : Sound file in SMAF format : Original ring tone (composed in Melody Editor) : Sound file in Standard MIDI format : Sound file in i Melody format : Sound file in WAVE format Note • SMAF (Synthetic music Mobile Application Format) is a format of music data for mobile phones. Downloading Sound Files 1. Press to display the Main Menu.
Changing the File Name 1. Perform steps 1 to 4 in “Playing Back Sounds” on page 43. 2. Select the file name you wish to change by pressing or , then press [Options]. The Options Menu is displayed. 3. Select “Rename”, then press . 4. Enter a new file name. To delete the last character, press [Clear] briefly. Press and hold [Clear] to clear all characters. 5. Press . Note • Following characters cannot be used for a file name: /, \, :, *, ?, ", <, > and . (full-stop).
5. Enter your message. For details on creating a message, see “Creating a New MMS” on page 107. Note • Sounds with a red icon cannot be sent attached to a message. • Only the first part of the data will be converted if you select “i Melody” in step 4. Deleting Sounds 1. Perform steps 1 to 4 in “Playing Back Sounds” on page 43. 2. Select the file name you wish to delete by pressing or , then press [Options]. The Options Menu is displayed. 3. Press or to select “Delete”, then press . 4.
Editing Bookmarks 1. Perform steps 1 to 3 in “Adding a Bookmark” on page 45. 2. Select the desired bookmark to edit by pressing or , then press [Options]. The Options Menu is displayed. 3. Press or to select “Edit”, then press . 4. Edit the bookmark title. For details on entering characters, see “Entering Characters” on page 24. 5. Press . 6. Edit the URL address. 7. Press . Deleting Bookmarks 1. Perform steps 1 to 3 in “Adding a Bookmark” on page 45. 2.
2. Select the number you wish to edit by pressing 4. Select “Yes”, then press . The selected text template is deleted. To cancel deletion, select “No” at step 4, then press . or , then press . 3. Press or to select “Edit”, then press . 4. Enter new text. To correct the last character, press [Clear] briefly. Press and hold [Clear] to clear all characters. 5. Press . Memory Status (M 2-6) Viewing Text Templates 1. Perform steps 1 to 3 in “Adding Phrases to My Text Templates” on page 46. 3. Press 2.
Fun & Games Java™ Games Settings (M 3-1-2) Operation Priority You can set the method of incoming phone calls and alarm whilst a JavaTM application is operated. 1. Press 2. Press press 3. 4. 5. 6. to display the Main Menu. or to select “Fun & Games”, then . Select “JavaTM Games”, then press Press or . to select “Settings”, then press Select “Operation Priority”, then press . . Select the option you wish to set by pressing , then press . The options available are: • “Incoming Call” • “Alarm” 7.
Backlight You can select the method of backlight during the operation of the JavaTM application from the following three types: • “On”: Lit whilst the JavaTM application is operated. • “Off”: Unlit whilst the JavaTM application is operated even if a key is pressed. • “Normal Settings”:Works with the main backlight setting. (p. 85) 1. Perform steps 1 to 4 in “Operation Priority” on page 48. 2. Press or to select “Backlight”, then press . 3. Select “On/Off”, then press . 4.
Online Services You can adjust the display settings of the confirmation screen when a JavaTM application attempts to connect to the network. 1. Perform steps 1 to 4 in “Operation Priority” on page 48. 2. Press or to select “Online Services”, then press . 3. Press or to select “Yes”, then press . To cancel confirmation, select “No”, then press . 5. Press or to select “Yes”, then press . All settings in a JavaTM application will be reset. To cancel resetting, select “No”, then press .
JavaTM Information (M 3-1-3) The information about the license of JavaTM can be displayed. Download More (M 3-1-4) See “Download” on page 38 for instructions. Game Guide 1. Perform steps 1 to 4 in “Starting Games”. 2. Press or to select “Guide”, then press Other Games (M 3-2) Your phone comes complete with 3 games (PK Game, Collection Hunter, Air Hockey). You can enjoy these 3 games soon after purchase.
Air Hockey (M 3-2-3) The level of the game can be chosen for “Air Hockey”. To Select a Game Level 1. Perform steps 1 to 3 in “Starting Games” on page 51. 2. Press or to select “Air Hockey”, then press . 3. Press 4. Press or to select “Level”, then press or to select the level, then press . . Setting up Game Options (M 3-2-4) 1. Perform steps 1 to 3 in “Starting Games” on page 51. 2. Press or to select “Game Settings”, then press . 3.
7. Press or to select a tempo, then press . The music tempo is described below. • “Allegro (Fast)”: 150 • “Moderato (Normal)”: 125 • “Andante (Slow)”: 107 • “Adagio (Very Slow)”: 94 Tempo is defined by the number of crotchets ( ) played per minute. 8. Select “8 Chords” or “16 Chords” by pressing or , then press . 9. Specify the musical scale and rest using the digit keys. For details on specifying the sound level and rest, see “Specify the Musical Scale and Rest” on page 54. 10.
Specify the Musical Scale and Rest Using the key shown below, specify the musical scale and rest. Do Re Mi Fa Sol La Ti Specifying the Types of Notes and Rests Specify notes and rests by pressing or repeatedly. Rest When you press the key shown above once, a crotchet is specified in the middle scale (no mark). When you press the same key repeatedly, the note will shift cycle through the available octave ranges.
Note • You cannot make a dotted semiquaver (semiquaver rest) or a dotted semibreve (semibreve rest). • Three continuous notes are required for triplet. To specify a tie, press after selecting the target notes. An underscore (_) is displayed next to the note, and the note is tied with the next one. To enter the next note, press and move the cursor to the right. Then, repeat the operation on the previous page.
Category Organs Basses Strings 2 Tone Category Drawbar Organ Perc. Organ Rock Organ Church Organ Guitars Reed Organ Accordion Harmonica Tango Accordion Acoustic Bass Finger Bass Pick Bass Fretless Bass Strings 1 Slap Bass 1 Slap Bass 2 Synth Bass 1 Synth Bass 2 Str. Ensemble 1 Str. Ensemble 2 Synth Strings 1 Synth Strings 2 Brasses Choir Aahs Voice Oohs Synth Voice Orchestra Hit Tone Nylon Guitar Steel Guitar Jazz Guitar Clean Guitar Muted Guitar Overdriven Gtr. Distortion Gtr. Gtr.
Category Percussions Original Tone Category Tinkle Bell Agogo Steel Drums Woodblock Effects Taiko Drums Melodic Tom Synth Drum Reverse Cymbal Original 1 (Piano)* Original 2 (Glockenspiel)* Original 3 (Reed Organ)* Original 4 (Nylon Guitar)* Original 5 (Violin)* Tone Gtr. Fret Noise Breath Noise Seashore Bird Tweet Telephone Ring Helicopter Applause Gunshot * The default setting tone. To create your original tone, see “Creating Your Original Tone” on page 61.
3. Press or to select an original ring tone you wish to edit, then press [Options]. The Options Menu is displayed. 4. Press or to select “Data Edit”, then press . 5. Edit the title and press . 6. Press or to select a tempo, then press . 7. Press or to select the number of chords, then press . 8. Select a note you wish to change by pressing or , then edit notes. When you add notes, enter the note correctly on the cursor. To delete a note, press [Clear] briefly. Press and hold [Clear] to clear all tones.
Copying and Pasting Notes You can copy and move a part of a melody to another position. Only original ring tones or editable melodies can be copied or moved. 1. Perform steps 1 to 7 in “Editing Original Ring Tones” on page 57. 2. Press [Options] to display the Options Menu. 3. Press press or . to select “Copy” or “Cut”, then 4. Move the cursor to the first note to be copied or to be cut and press . 5. Move the cursor to the last note to highlight the area and press .
Setting an Algorithm Set the combination of the operator. Select from 4 types of combinations in 8 chords, and 2 types in 16 chords. 8 Chords Algorithm3 Algorithm4 Algorithm5 Parameter Multiple (13 levels) Algorithm6 16 Chords Algorithm1 Setting the Operator The meaning and content of the parameter that can be set to the operator is described below.
Parameter Decay Rate (16 levels) Sustain Level (16 levels) Release Rate (16 levels) Wave Shape (8 types) Vibrato (4 levels/ Off) Tremolo (4 levels/ Off) Feedback (8 levels) Meaning This sets the time from the maximum volume to the volume of the sustain level. In sustaining note, this displays the volume of the sound that continues to produce. In fading-out note, this displays the volume when the note starts fading-out.
11. Select a base tone by pressing or , then press . When “Confirm Tones” is selected, the syllable names are played back in the selected tone. 12. Select “OK”, then press . 13. Press or . to select “Details Editor”, then press 14. Press or to select “Algorithm x”, then press . 15. Select an algorithm you wish to set by pressing or , then press . If you do not wish to change the operator, skip to step 20. 16. Select an operator you wish to change by pressing or , then press .
Profiles (M 4) Note • When a profile is set, the icon which corresponds to the profile name appears in the stand-by screen: Normal: Is the default setup. (not displayed in the stand-by screen) Meeting: For use when discretion is needed. Activity: For use in busy environments. Car: For use in the car. (connected to a hands free kit) Silent: For use when silence is needed. All sounds are muted and you are alerted to calls with the vibrator. You can easily alter the phone tone (e.g.
Ringer Volume 5. Change the setting you want. For details about settings, see pages 64 to 68. Resetting Profile Settings You can adjust the ringer volume to one of 5 levels. When it is set to “Silent”, the volume of games and JavaTM applications is muted. 1. Perform steps 1 and 2 in “Activating a Profile” on 1. Perform steps 1 to 3 in “Customising Profiles” on page 63. 2. Select the profile you wish to reset by pressing or , then press . 3. Press 4. Press press or to select “Edit”, then press or .
3. Press or to select “Preset Melody” or “My Sounds”, followed by . 4. Select the ring tone you wish to use by pressing or . If you wish to hear the demo, press To stop playing, press [Stop]. 5. When selection is complete, press [Play]. . Vibration When the vibrator option is set to on, the phone will vibrate for incoming calls regardless of the ringer volume and tone settings. 1. Perform steps 1 to 3 in “Customising Profiles” on page 63. 2. Press or to select “Vibration”, then press . 3.
When you select “Preset Melody” or “My Sounds” in step 7: 8. Select the keypad tone. For details on selecting a ring tone, see “Ringer Type” on page 64. 9. Press or to select “Duration”, then press . 10. Set the duration by pressing or , then press . to select “Melody”, then press 3. Press or to select “On” or “Off”, then press . If you select “Off”, the screen returns to step 1. 4. Select “Volume”, then press . . or to select “Preset Melody” or “My Sounds”, then press . 8.
3. Press or to select “On” or “Off”, then press . If you select “Off”, the screen returns to step 1. 4. Select “Volume”, then press . 5. Press to increase the volume or press decrease the volume and then press . 6. Press 7. Press or to to select “Melody”, then press or to select “Preset Melody” or “My Sounds”, then press . 8. Select the ring tone. . Message Alert When receiving messages, special ring tones can be set. 1. Perform steps 1 to 3 in “Customising Profiles” on page 63. 2.
11. Press or to select “Duration”, then press . 12. Enter the duration of ring tone in 2 digits (01 to 99 seconds) using the digit keys, then press . Low Battery Alert Adjust the volume of the alarm when the battery becomes low. 1. Perform steps 1 to 3 in “Customising Profiles” on page 63. 2. Press or to select “Low Battery Alert”, then press . 3. Press to increase the volume or press decrease the volume and then press . to Any Key Answer 1.
Organiser 6. If you wish to start a new calculation, press When calculation is complete, press Calculator (M 5-1-1) The calculator function performs the 4 arithmetic calculations using up to 12 digits. 1. Press to display the Main Menu. 2. Press or to select “Organiser”, then press . 3. Select “Calculator”, then press 4. Select “Calculator”, then press . . The calculator appears on the display. 5. Key operations for calculation are as follows.
3. Press or to select “In Domestic” or “In Foreign”, then press . The result is displayed. If you select “Exchange Rate” in step 3, you can set a currency conversion rate. 4. When calculation is complete, press . Note • You cannot perform step 2 when a sign of the four fundamental processes of arithmetic is displayed. Calendar (M 5-2) The Calendar function helps you organise and manage your busy schedule. You can view the stored schedule on a monthly basis. 1. Press 2. Press to display the Main Menu.
Deleting Schedules 5. Select “Yes”, then press To Delete Schedule Items 1. Perform steps 1 to 3 in “Calendar” on page 70. 2. Select the day by pressing , , or , then press . 3. Select the item you wish to delete by pressing or , then press [Options]. The Options Menu is displayed. 4. Press or to select “Delete”, then press . 5. Select “1 Data”, then press . 1. Perform steps 1 to 3 in “Calendar” on page 70. 2. Press [Options] to display the Options Menu. 3. Press or to select “Delete” to delete all 6.
4. Press press or . to select “Set Date/Time”, then or to select “Date Format”, then press . 5. Enter the day, month, year and time using the digit keys, then press . When you enter the time in a 12-hour clock format, press and change am/pm. The order in which the date and time appears is based on the format setting. See “To Select the Date Format”. To Select the Time System 1. Perform steps 1 to 3 in “Setting the Date and Time” on page 71. 2. Press or to select “Clock Settings”, then press . 3.
2. Press or . to select “Clock Settings”, then or . to select “Daylight Saving”, then press 4. Press or to select “On”, then press press 3. Press . Setting the Time Zone (M 5-3-3) 1. Perform steps 1 to 3 in “Setting the Date and Time” on page 71. or to select “Set Time Zone”, then press . 3. Press 2. Press press 3. Select “Change Zone”, then press . 4. Press or to set the home city, then press . To Customise the Time Zone 1. Perform steps 1 to 3 in “Setting the Date and Time” on page 71.
10. Press to select “On” or “Off”, then press To Change the Alarm Vibration or to select “Alarm Status”, then press 1. Perform steps 1 to 6 in “Setting Alarm” on page 73. 2. Press or to select “Alarm Tone”, then press or to select “On”, then press 3. Press or . 11. Press . 12. Press 13. Press . . To Change the Type of Alarm Tone 1. Perform steps 1 to 6 in “Setting Alarm” on page 73. 2. Press or to select “Alarm Tone”, then press . 3. Select “Melody”, then press . 4.
Resetting All Alarm Settings Changing Alarm Settings 1. Perform steps 1 to 5 in “Setting Alarm” on page 73. 2. Select the number you wish to change by pressing or , then press . 1. Perform steps 1 to 4 in “Setting Alarm” on page 73. 2. Press or to select “Clear All”, then press 3. Change Alarm settings. 3. Press For details on changing Alarm settings, see “To Change the Type of Alarm Tone” on page 74. Disabling Alarm Function 1. Perform steps 1 and 2 in “Changing Alarm Settings”. 2.
5. Select “Save” to save the voice memo, then press . If you wish to exit the voice memo, press then select “Yes”. [Exit], Tip • You can also record a voice memo by pressing and instead of steps 1 to 3. • If you wish to record a voice memo again, select “Record Again” in step 5. The screen will return to step 4. To Play Back the Saved Voice Memo 1. Perform steps 1 to 4 in “Recording a Voice Memo” on page 75. 2. Press or to select “Playback”, then press .
Call Manager Call Log The phone will record the last 10 missed calls, received calls and dialled numbers. Viewing Call Log 1. Press to display the Main Menu. 2. Press or to select “Call Manager”, then press . 3. Press or to select “Call Register”, then press . 4. Press or to select “Missed Calls”, “Received Calls” or “Dialled Numbers”, then press . The selected call log list is displayed. 5. Select the number you wish to view by pressing or . 6. Press [View]. Call record “1” is the most recent.
4. Press or to select “Yes”, then press . The selected call record will be deleted. To cancel deletion, select “No” in step 4, then press . To Delete All Call Log (M 6-2-4) 1. Perform steps 1 to 3 in “Viewing Call Log” on page 77. 2. Press or to select “Clear Logs”, then press . 3. Select “All Calls”, then press . 4. Press or to select “Yes”, then press . All call log records will be deleted. To cancel deleting, select “No” in step 4, then press .
2. Press or to select “Clear Timers”, then press . 3. Press or to select “Yes”, then press . . To cancel resetting, select “No”, then press 4. Enter your handset code, then press . The Call Timers are reset to zero. Call Costs (M 6-2-6) This function lets you check the charges for your calls. Charging Advice is not supported on all networks. Please check with your service provider for availability. Checking the Cost of the Last Call 1. Press to display the Main Menu. 2.
Setting the Charge Rate Set the charge rate to calculate the call cost and set the maximum limit for call cost. 1. Perform steps 1 to 4 in “Checking the Cost of the Last Call” on page 79. or to select “Cost Units”, then press . 2. Press 3. Press or to select “Set Units”, then press . 4. Enter your PIN2 code, then press 5. Enter a cost per unit, then press To enter a decimal point, press at step 3 in “Setting the Charge Rate”. The charge rate is now displayed. 2. When you have finished, press [Back].
Resetting All Call Costs Data Counter (M 6-2-7) 1. Perform steps 1 to 4 in “Checking the Cost of the You can confirm the amount of bytes which you used in the GPRS transmission. 1. Press to display the Main Menu. 2. Press or to select “Call Manager”, then press . Last Call” on page 79. 2. Press or to select “Clear Costs”, then press . 3. Press or to select “Yes”, then press To cancel resetting, select “No”, then press 4. Enter your PIN2 code, then press . The Call Costs are reset to zero. . .
Diverts (M 6-3) This service is used to divert incoming calls to your voice mail system or to another number depending on certain conditions in which you cannot answer a call. Divert Calls 1. Press to display the Main Menu. 2. Press or to select “Call Manager”, then press . 3. Press or to select “Diverts”, then press . 4. Select one of the divert options by pressing or , then press . The divert options available are: • “All Calls”: Diverts all voice calls without ringing.
Checking the Divert Status 1. Perform steps 1 to 3 in “Divert Calls” on page 82. 2. Select the divert option you wish to check by pressing or , then press . 3. Press or to select “Status”, then press . You can now check the status of the selected divert option. 4. When you have finished, press [Back]. Cancelling All Divert Settings 1. Perform steps 1 to 3 in “Divert Calls” on page 82. 2. Press or to select “Cancel All”, then press . 3. Press or to select “Yes”, then press .
Settings Phone Settings Changing the Language (M 7-1-1) You can change the display language that the phone uses for the display messages and text entry. 1. Press to display the Main Menu. 2. Press or to select “Settings”, then press . 3. Select “Phone Settings”, then press . 4. Select “Language”, then press . 5. Press or to select the desired language, then press . Wallpaper for the Stand-by Screen (M 7-1-2) For the stand-by screen, an animation and 3 illustrations are provided.
To Set My Pictures for the Stand-by Screen 1. Perform steps 1 to 3 in “To Set Built-in Animations or Illustrations” on page 84. 2. Press or to select “My Pictures”, then press . The file names of the pictures/images that are registered in the Saved Pictures is displayed. 3. Select the picture/image by pressing or , then press . The selected picture/image is displayed. 4. Specify the range for displaying the picture/image by pressing , , or , then press .
Adjust the Brightness of the Backlight (M 7-1-4) You can adjust the brightness of the backlight of the main screen display at four levels. 1. Perform steps 1 to 3 in “Changing the Language” on page 84. 2. Press or to select “Brightness”, then press . 3. Press (Light) or (Dark) to adjust the brightness for maximum clarity. 4. Press . Note • The brightness of the backlight does not affect the brightness of the Sub-Screen.
Setting the Greeting Message (M 7-1-6) You can set the message which will appear when the phone is turned on. 1. Perform steps 1 to 3 in “Changing the Language” on page 84. 2. Press or to select “Greeting Message”, then press . 3. Press or to select “On”, then press 4. Enter the message, then press . . Up to 16 characters can be stored as a message. For details on entering characters, see “Entering Characters” on page 24. Tip • To cancel the Greeting Message setting, select “Off” in step 3.
3. Select the picture/image by pressing or , then press . The selected picture/image is displayed. 4. Specify the range for displaying the picture/image by pressing , , or , then press . Note • Some pictures/images cannot be used because of their picture/image and data types. External Display (M7-1-8) You can change the settings of the Sub-Screen Display. To Turn On/Off the Sub-Screen Display You can turn the Sub-Screen Display on or off when the phone is closed. 1.
2. Press or to select “External Display”, then press . 3. Press or to select “LCD Contrast”, then press . 4. Press (Dark) or (Light) to adjust the contrast for maximum clarity. LCD contrast can be adjusted in 9 levels. 5. Press . Phone Setting Reset (M 7-1-9) The phone settings can be reset to their default settings. 1. Perform steps 1 to 3 in “Changing the Language” on page 84. 2. Press or to select “Set to Default”, then press . 3. Enter your handset code, then press . 4.
To Check the Call Waiting Service Status 1. Perform steps 1 to 4 in “Call Waiting” on page 89. 2. Press or to select “Status”, then press . Now you can check the status of the Call Waiting service. 3. Press [Back]. Display Call Timers (M 7-2-2) 1. Perform steps 1 to 3 in “Call Waiting” on page 89. 2. Press or to select “Display Call Timers”, then press . 3. Select “On” or “Off” by pressing press or , then . Caller No.
Personal Call (M 7-2-4) A specified ring tone or vibrator setting can be associated to a pre-registered phone number. Up to 20 phone numbers can be registered. 1. Perform steps 1 to 3 in “Call Waiting” on page 89. 2. Press or to select “Personal Call”, then press . 3. Select the number you wish to set by pressing , then press or . 4. Enter the phone number, then press . If you wish to select the phone number in the Phonebook, search for the desired Phonebook entry.
6. Select a ring tone. For details on selecting a ring tone, see “Ringer Type” on page 64. 7. Press or to select “Vibration”, then press . 8. Press or to select “Enable”, “Disable” or “Link to Sound”, then press . For details on setting the vibration, see “Vibration” on page 65. 9. When setting is complete, select “Setup End”, then press . Tip • To cancel the ring tone setting, select “Off” in step 4. Auto Redial (M 7-2-6) See “Automatic Redialling” on page 20 about this function.
Network Settings Adding a New Network Selecting a Network Automatically (M 7-3-1) Each time the power is turned on, your phone will always try to connect first to the most recently available network, then to the subscribed network, and lastly to the preferred network. If none of these are found, it will then search for any other available GSM networks. 1. Press to display the Main Menu. 2. Press or to select “Settings”, then press . 3. Press press or . to select “Network Settings”, then 4.
4. Press or then press to select “Insert” or “Add to End”, . To Delete a Network from the Preferred List 1. Perform steps 1 to 3 in “To Change the Position of a Network in the Preferred List” on page 93. 2. Press or to select “Delete”, then press . Changing the Network Password (M 7-3-2) 1. Perform steps 1 to 3 “Selecting a Network Automatically” on page 93. 2. Press press or .
Internet Settings (M 7-4) Item WAP/MMS Settings WAP Settings and MMS Settings can perform following various setups, respectively. Description Circuit Prompt Circuit Prompt Profile Name* Description Operation Select “Profile Name” and WAP Profile press . Name (Unique Enter the strings you like Name) and press . Select “IP Address” and IP Address* IP address press . Enter IP address for WAP and press Homepage Homepage . Settings Bearer Connection Type and press .
Item Password Description Password Operation Select “Password” and press . Enter Password and press Item Password Description Password Operation Select “Password” and press . Enter Password and press . . Select “Linger Time” and Linger Time Linger Time press . Enter second time (099999) and press Linger Time Linger Time . CSD Settings (If “GPRS Then CSD” or “CSD” will be selected as connection type, they should be set) Select “Phone No.” and Phone No.* Access Point Number press .
Item Relay Server URL* Description MMS Relay Server Operation Select “Relay Server URL” and press . Enter URL of the Relay Server and press Item UserName Description User Name Security Option press . Enter Port Number (102465535) and press Select “Password” and Password Password Bearer Connection Type and press . Select “GPRS Then CSD”, “GPRS” or “CSD” and press .
Item UserName Description User Name Operation Select “UserName” and press . Enter User Name and press . Password Password To Set up your Account Information This information should be supplied by your Internet service provider. 1. Press to display the Main Menu. 2. Press or to select “Settings”, then press . Select “Password” and 3. Press press . Enter Password and press 4. Press press Linger Time Linger Time 99999) and press *: Item to be set as mandatory. 5.
WAP Push Setting (M 7-4-3) You can select whether to accept the information supplied by your Internet service provider or not. 1. Press to display the Main Menu. 2. Press or to select “Settings”, then press 3. Press press 4. Press press 5. Press press or . to select “Internet Settings”, then You can use the built-in infrared modem to establish contact between your phone and a PC equipped with an infrared port. 1. Press to display the Main Menu. 2. Press or to select “Settings”, then press . or .
Security (M 7-6) Enabling/Disabling the PIN Code (M 7-6-1) If the PIN code is enabled you will be asked in enter the PIN code each time the phone is switched on. Your PIN code is stored on the SIM and you should have been made aware of the code when you purchased the SIM. Contact your service provider for further details. 1. Press to display the Main Menu. 2. Press or to select “Settings”, then press . 3. Press 4. Press or to select “Security”, then press or to select “PIN Entry”, then press .
3. Press or to select “On” or “Off”, then press . 4. Enter your handset code, then press . If you enter an incorrect handset code, the screen will clear and you will be prompted to enter the code again. Changing Handset Code The default handset code is “0000”. 1. Perform steps 1 to 2 in “Handset Lock” on page 100. 2. Press or to select “Change Code”, then press . 3. Enter the old handset code, then press . 4. Enter a new handset code, then press . 5. Enter a new handset code again, then press .
The call barring functions available are: • “Bar Foreign Calls”: Restricts all outgoing international calls. • “Only Local & Home”: Restricts all outgoing international calls except to your home country. • “Bar Incoming Calls”: Restricts all incoming calls. • “Bar Inc. if Abroad”: Restricts all incoming calls when you are outside of the coverage from your registered network operator. • “Bar Outgoing Calls”: Restricts all outgoing calls except emergency calls. 4.
To Cancel the Call Barring Setting Individually 1. Perform steps 1 to 3 in “Call Barring” on page 101. 2. Select the call barring option you wish to cancel by pressing or , then press . 3. Press or to select “Off”, then press 4. Enter the Barring password, then press . . The selected call barring setting is cancelled. Fixed Dialling No. (M 7-6-5) When the Fixed Dialling No. is enabled, you can call to only predefined numbers. 2. Press or to select “Edit Dial List”, then press . 3. Press 4.
Editing a Registered Name 1. Perform steps 1 and 2 in “Adding a New Name” on page 103. 2. Select a name you wish to edit, then press . Master Reset (M 7-7) 3. Press or to select “Edit”, then press 4. Edit the selected name. 3. Press . or . to select “Master Reset”, then press . For details on editting a name, see “Editing Phonebook Entries” on page 28. 4. Enter your handset code, then press . 5. Press or to select “Yes”, then press Deleting a Registered Name 1.
Vodafone live! Your phone contains a WAP browser used for surfing on the Mobile Internet, where you can get a lot of useful information. Normally, pages are designed for a mobile phone. Your phone is already set up to use the Vodafone WAP and MMS services. To Exit the WAP Browser to exit the browser. 1. Press Navigating a WAP Page • • • • • • Viewing the WAP Browser 1. Press [ ] during stand-by. 2. Select the menu you wish to view by pressing , then press 105 Vodafone live! .
Browser Menu When you have started browsing, you can reach browsing options by pressing . Reload: Settings: The Browser Menu contains the following: Tip • The information accessed through the WAP browser on the Internet will be stored in the cache memory of your phone. When the same information is accessed again, the WAP browser reads and displays the information stored in the cache memory instead of accessing the Internet (depending on the contents of the Internet site).
Messages Your phone allows you to send and receive short messages, MMS and WAP mails. MMS (Multimedia Messaging Service) About MMS MMS allows you to further personalise your messages with pictures, sounds and animations. Note • Some MMS functions may not always be available depending on your network. Contact your network operator for more information. 6. When you finish setting, press 107 Press [ ] during stand-by. Select “MMS”, then press .
order, then press . For details on searching the Phonebook entries, see “Finding a Name and Number” on page 28. 6. Select “Send”, then press To Add Recipients 1. Perform steps 1 to 5 in “Creating a New MMS” on page 107. . The confirmation screen of file size is displayed. 7. Select “Yes”, then press . After the message has been sent, the message is added to the Sent box. 2.
To Save a Message in the Drafts Box You can save a message in the Drafts box temporarily and send it later, without sending it immediately. 1. Perform steps 1 to 5 in “Creating a New MMS” on page 107. 2. Press or to select “Save”, then press to save the message in the Drafts box. Note • You can send it later following the instructions in “Sending a Message in the Drafts Box” on page 110. Turning the Slide Show Setting On or Off 1. Perform steps 1 to 3 in “Creating a New MMS” on page 107. 2.
To Add Attached Data 1. Perform step 1 to 3 in “Inserting Attached Data” on page 109. The list of attached data is displayed. 2. Select the file name you wish to add by pressing or , then press [Options]. 3. Press or to select “Add Picture” or “Add Sound”, then press . 4. Perform steps 4 and 5 in “Inserting Attached Data” on page 109. To Delete Attached Data 1. Perform steps 1 to 3 in “Inserting Attached Data” on page 109. The list of attached data is displayed. 2.
3. Press or to select the desired message, then press . The message is displayed. 4. Scroll the screen by pressing or to read the message. 5. When you finish viewing, press [Done]. To Check the Sender and Receiver Phone Number or E-mail Address 1. Perform steps 1 to 3 in “Incoming Messages” on page 110. 2. Press [Options] to display the Options Menu. Replying to a Message to the Sender from Inbox 1. Perform steps 1 and 2 in “Creating a New MMS” on page 107. 2. Press or to select “Inbox”, then press .
Forwarding a Message 1. Perform steps 1 to 3 in “Replying to a Message to the Sender from Inbox” on page 111. 2. Press or to select “Forward”, then press . 3. Enter phone number or E-mail address of the recipient, then press . If you wish to select the phone number or E-mail address in the Phonebook, search for the desired Phonebook entry. Press or [Search] to search the number by name or press or to search in alphabetical order, then press .
Retrieving MMS When “ ” is in the Inbox, the following can be done. 1. Perform steps 1 and 2 in “Creating a New MMS” on page 107. 2. Press or to select “Inbox”, then press . 3. Press or download. 4. Press 5. Press to select a desired alert to to display the Alert Menu. or to select “Download”, then press . Deleting Messages 1. Perform steps 1 and 2 in “Creating a New MMS” on page 107. 2. Press or to select “Inbox”, “Drafts” or “Sent”, then press . 3.
SMS (Short Message Service) About SMS The Short Message Service (SMS) allows you to send text messages of up to 1024 characters to other GSM users. Using SMS with Your Phone Messages longer than 160 characters may be composed. During sending, the messages will be split. If the receiver has a suitable phone the messages will recombine during reception, if not your message will appear as a number of separate 152 characters messages. You can send or receive SMS even if you are talking on the phone.
3. Select the message format by pressing then press or , . Connection Type 1. Perform steps 1 to 3 in “Setting up SMS” on page 114. 2. Press or to select “Connection Type”, then press . 3. Select the connection type by pressing then press or , . Creating a New SMS (M 0-2-1) Press [ ] during stand-by. Press or to select “SMS”, then press 1. 2. 3. 4. Select “Compose”, then press . . Enter your message. For details on entering characters, see “Entering Characters” on page 24. 5. Press .
Sending a Message 1. Perform steps 1 to 5 in “Creating a New SMS” on page 115. 2. Enter the SMS phone number of the recipient, then press . 3. If you wish to select the SMS phone number in the Phonebook, search for the desired Phonebook entry. Press or [Search] to search the number by name or press or to search in alphabetical order, then press . For details on searching the Phonebook entries, see “Finding a Name and Number” on page 28. 4. Press or to select “Send”, then press .
4. Enter your message. Modifying a Message For details on entering characters, see “Entering Characters” on page 24. 5. Press . Follow the procedure from step 2 in “Sending a Message” on page 116. 1. Perform steps 1 and 2 in “Creating a New SMS” on Calling the Message Sender 1. Perform steps 1 to 3 “Reading SMS” on page 116. 2. Press [Options] to display the Options Menu. 4. Press [Options] to display the Options Menu. 5. Select “Edit”, then press . 6. Modify the message, then press . 3.
Extracting Phone Numbers from the Received Messages and making a call you can make a call using a telephone number embedded in the received SMS message. 1. Perform steps 1 and 2 in “Reading SMS” on page 116. 2. Press [Options] to display the Options Menu. Cell Broadcast (M 0-3) 3. Press Enabling/Disabling Cell Broadcast (M 0-3-1) or to select “Extract Numbers”, then press . Any kinds of numbers are listed. 4. Press or to select the telephone number, then press . 5. To make a call, press .
Cell Information (M 0-4) Subscribing to Cell Broadcasts Select the page of the cell broadcast message that you want. 1. Press 2. Press press 3. Press 4. Press press 5. Press press 6. Press [ or . ] during stand-by. to select “Cell Broadcast”, then or to select “Settings”, then press or . to select “Set Info Subjects”, then or . to select “Create Subject”, then Enabling/Disabling Cell Information to add the channel. 7.
Data Transmission Your PC can be set up to use the GX10i as a modem. You can either use Infrared (IrDA) or a data cable “XN1DC10” (option) to connect to the PC. Refer to XN-1DC10 attached manual for the connection method of a data cable. System Requirements Windows®98*, Windows®Me, Windows®2000, Windows®XP * Windows®98 Second Edition, or Windows®98 + Internet Explorer 5.01 or later OS: Interface: Infrared (IrDA) or Serial port (D-sub 9-pin connector) CD-ROM drive Software Installation and Setup 1.
Transmitting Picture/Image Files By installing software for data transmission into your PC, you can transmit picture/image files between your phone and a PC. The data cable (RS232C) “XN-1DC10” (option) is necessary for connection to a PC. Download software for data transmission from the download page in the following site. http://www.sharp-mobile.com Note • Some large picture/image files may not be able to be transmitted from the PC to the phone.
Troubleshooting Problem The phone does not turn on. PIN code or PIN2 code is rejected. SIM card becomes locked. The display is difficult to read. Problem Solution • Make sure the battery is properly inserted and charged. • Make sure you have entered the correct code (4 to 8 digits). • Your SIM card/protected functions will become locked after 3 unsuccessful attempts. • Contact your SIM provider if you do not have the correct PIN code.
Problem Call quality is poor. Cannot access network service. Cannot send or receive SMS. Cannot connect to MMS service provider. 123 Solution • Your current location may not provide good call quality (i.e., in a car or train). Move to a location where radio signal strength is greater. • Check whether your account has been registered, and whether the service is available.
Safety Precautions and Conditions of Use Your phone conforms to international regulations insofar as it is used under normal conditions and in accordance with the following instructions. CONDITIONS OF USE Electromagnetic waves • Do not switch on your phone aboard an aircraft (as your phone may interfere with the aircraft’s electronic systems). Current legislation forbids this use and legal action can be taken against the user. • Do not switch on your phone in a hospital, except in designated areas.
Battery • Use your phone only with batteries, chargers and accessories recommended by the manufacturer. The manufacturer disclaims any liability for damage caused by the use of other chargers, batteries or accessories. • Network configuration and phone usage will affect talk-time and stand-by time. Using the games or camera will hasten battery consumption. • When the battery charging alert is displayed on the screen, charge the battery as soon as possible.
• Use only the aerial supplied or one approved by Sharp for your mobile phone. Using unauthorised or modified aerials may damage the mobile phone. Moreover, since the mobile phone may violate the appropriate regulations, it may lose performance or exceed the limitation of SAR levels. • To avoid impaired performance, do not damage the aerial of the mobile phone. • Whilst talking directly to the microphone, please hold the mobile phone so that the aerial is upwards over your shoulder.
PRECAUTIONS CONCERNING VEHICLE USE • It is the user’s responsibility to verify if local laws permit the use of a mobile phone in a vehicle. Give full attention to driving. Pull off onto the side of a road and park the car before making or answering a call. • If local laws permit, we recommend that you use your phone with the supplied hands free kit. • Use of your phone’s function may interfere with the vehicle’s electronic systems, such as the ABS antilock brakes or the air-bag.
Index A Accessories 7 B Battery 10 Charging 13 Disposal 13 Inserting 10 Removing 12 Battery Level Indicator 14 C Calculator 69 Rate Conversion 69 Calendar 70 Deleting Schedules 71 Find a Particular Date 70 Call 19 Answering 20 Ending 20 Holding 21 Making 19 Making Another Call During a Call 21 Rejecting 21 Call Costs 79 Checking Charge Limit 80 Checking Charge Rate 80 Checking Cost of Last Call 79 Checking Residual Credit 81 Checking Total Call Cost 79 Resetting All Call Costs 81 Setting Charge Limit 80
Changing Alarm Settings 75 Disabling Alarm Function 75 Resetting Alarm Setting 75 Resetting All Alarm Settings 75 Setting Alarm 73 Setting Date and Time 71 Setting Time Zone 73 Clock Setting 71 Setting Date and Time 71 Conference Call 22 Adding New Participants 23 Ending Call with a Participant 23 Making 22 Private Conversation 23 D Data Counter 81 Resetting 81 Data Transmission 120 Modem Setup 120 Software Installation/Setup 120 System Requirements 120 Transmitting Picture/Image Files 121 Diverts 82 Cance
Musical Scale/Rest 54 Strength 57 Tone 55 Types of Notes/Rests 54 Memory Status 47 Menu 32 List of Menu Functions 33 Main Menu 32 Operation Guidance 32 Shortcut Keys 32 Side Keys 32 Messages 107 MMS 107 SMS 114 Microphone 9 Muting 23 Mirror 9 MMS 107 Adding Recipients 108 Check the Sender and Receiver Phone Number or E-mail Address 111 Creating 107 Deleting 113 Extracting Phone Numbers 118 Forwarding 112 Inserting Attached Data 109 Lock/Unlock 113 Making a Call 113 Modifying 112 Reading 110 Replying 111 Re
Adding New Network 93 Changing Network Password 94 Editing Preferred List 93 Selecting a Network Automatically 93 Selecting an Applicable Zone 94 O Organiser 69 Other Games 51 Setting up Game Options 52 Starting 51 P Phone Settings 84 Assign Pictures 87 Backlight 85 Brightness of Backlight 86 Built-in Animations/Illustrations 84 Changing Language 84 Display Saving 86 External Display 88 Greeting Message 87 Resetting 89 Wallpaper 84 Phonebook 24 Adding Number from Call Log 131 Index 27 Creating New Entry
Calling 117 Creating 115 Deleting 117 Forwarding 117 Modifying 117 Reading 116 Replying 116 Saving in Outbox 115 Sending 116 Setting up 114 Storing Sender’s Number in Phonebook 118 Speaker 9 Speed Dialling 19, 30 Navigating WAP Page 105 Viewing WAP Browser 105 Voice Memo 75 Playing Back 76 Recording 75 T Tone Editor 59 Algorithm 60 Creating Your Original Tone 61 Effect Frequency 61 FM Sound Source 59 Operator 60 Troubleshooting 122 Turning Your Phone On/Off 15 V Vodafone live! 105 Browser Menu 106 Index
Index
QUICKSTART GUIDE: INTRODUCTION More than voice and text – now it’s pictures, music and games! For instance: • Taking and sending colour photos • Playing arcade quality games • Amazing your friends with polyphonic ringtones • Accessing the mobile internet quickly and easily How to do all this is described in detail inside this manual. But if you are already familiar with how a mobile phone works, you probably want to try out the new features straight away – the things you couldn’t do before.
QUICKSTART GUIDE: NAVIGATION & CAMERA Trying out your phone OK. Your SIM card’s in the handset, and you’ve charged the battery (see “Getting Started”, p.8). Turning it on: Press and hold the red key for two seconds (the same to turn off). Navigation and selection: The GX10i uses icons to help you navigate (like on your PC). •Press the central silver key to access the icons on the Main Menu. •Use to move up and down the on-screen menus, and the key or to select. takes you back to a previous menu.
QUICKSTART GUIDE: MESSAGING & GAMES Picture Messaging 3. You’ll be asked to OK the file size: select “Yes”, press and watch it being sent. Use the MMS (Multi Media Messaging) function to send your photo together with a text message. 1. From the Main Menu scroll up to “Messages”. 2. Press and select “MMS”. Tip: Try sending to yourself to see how it works. Problems? You may need to be registered for MMS – speak to Vodafone customer services. 3. Press Playing games Shoot Attaching your photo: 1.
QUICKSTART GUIDE: RINGTONES & PORTAL Polyphonic Ringtones Accessing the Vodafone live! portal The Sharp GX10i comes with a range of amazing ringtones already loaded for you to try out. 1. Your phone is already set up to use the mobile internet browser. On the start-up screen you’ll see the Vodafone live! logo at the bottom right . Press to select it, and this will start the connection process (see the Vodafone section, p.105). 2.
QUICKSTART GUIDE: EINFÜHRUNG Mehr als Telefonieren und Texten - nun auch mit Fotos, Musik und Spielen! Herzlichen Glückwunsch zur Ihrem neuen Sharp GX10i. Mit diesem innovativen Handy können Sie viel mehr machen als nur zu telefonieren und SMS zu versenden. Nutzen Sie die neuen Features von Vodafone live! Wie das alles funktioniert, können Sie in diesem Handbuch detailliert nachlesen.
QUICKSTART GUIDE: NAVIGATION & KAMERA Wie Sie Ihr Handy nutzen Haben Sie Ihre SIM-Karte in Ihr Handy eingelegt und den Akku aufgeladen (siehe „Erste Schritte“, S. 8). Einschalten: Halten Sie die rote Taste zwei Sekunden lang gedrückt (ebenso zum Ausschalten). Navigation und Auswahl: Das Sharp GX10i enthält Symbole, die Sie bei der Navigation unterstützen (wie Ihr PC). •Drücken Sie die silberne Taste in der Mitte, um zu den Symbolen im Hauptmenü zu gelangen.
QUICKSTART GUIDE: MESSAGING & SPIELE Versenden von Fotos 3. Sie werden nun aufgefordert, die Dateigröße zu bestätigen: Wählen Sie „Ja“, drücken Sie , und ab geht die Post. Mit MMS (Multi Media Messaging) können Sie Fotos mit einer Textnachricht versenden. 1. Führen Sie im Hauptmenü einen Bildlauf bis „Nachrichten“ aus. 2. Drücken Sie , und wählen Sie „MMS“. 3. Drücken Sie , und wählen Sie „Schreiben“. Shoot 4. Drücken Sie , und schreiben Sie Ihre Textnachricht. Fotos anhängen: 1. Drücken Sie [Optionen].
QUICKSTART GUIDE: KLINGELTÖNE & PORTAL Polyphone Klingeltöne Verbindung zum Vodafone live! Portal Das Sharp GX10i enthält eine tolle Auswahl polyphoner Klingeltöne, die Sie direkt ausprobieren können. 1. Ihr Handy ist bereits so eingestellt, dass es den mobilen Internetbrowser verwenden kann. Auf dem Startbildschirm sehen Sie unten rechts das Vodafone live! Logo . Wählen Sie es durch Drücken von aus. Die Verbindung wird aufgebaut (siehe Abschnitt Vodafone, S. 105). 2.
GUIDA RAPIDA: INTRODUZIONE Non solo telefonate e messaggi…adesso anche foto, musica e giochi! Congratulazioni per aver scelto il nuovo telefono Sharp GX10i.
GUIDA RAPIDA: NAVIGAZIONE E FOTOCAMERA DIGITALE Il telefono Utilizzo della fotocamera digitale OK. La carta SIM è nel cellulare e la batteria è carica (vedere “Guida introduttiva” a pag. 8). Accensione: mantenere premuto il tasto rosso per due secondi (eseguire la stessa operazione per spegnere il telefono). Navigazione e selezione: le icone del GX10i rendono più facile la navigazione (come su un PC). •Premere il tasto argentato centrale per accedere alle icone del Menu principale.
GUIDA RAPIDA: MESSAGGISTICA E GIOCHI Invio delle immagini via MMS 3. Verrà chiesto di confermare la dimensione del file: selezionare “Sì” e premere per inviare il messaggio. Usare la funzione MMS (Multi Media Messaging) per inviare una foto insieme a un messaggio di testo. 1. Scorrere il Menu principale fino a “Messaggi”. 2. Premere e selezionare “MMS”. 3. Premere e selezionare “Componi”. 4. Premere e scrivere il messaggio.
GUIDA RAPIDA: SUONERIE E PORTALE Suonerie polifoniche Come accedere al portale Vodafone live! Il telefono Sharp GX10i già contiene una serie di fantastiche suonerie, da provare subito. 1. Il telefono è già configurato per utilizzare il browser per navigare su Internet. Nella schermata di avvio il logo Vodafone live! compare in basso a destra. Premere per selezionarlo. In questo modo si avvia il processo di connessione al Web (vedere il paragrafo Vodafone a pag. 105). 2.
GUÍA RÁPIDA: INTRODUCCIÓN Más que voz y texto: ¡ahora también fotos, música y juegos! Por ejemplo: • Tomar y enviar fotos en color • Divertirse con videojuegos de calidad • Asombrar a sus amigos con tonos de llamada polifónicos • Acceder a Internet para móviles rápida y fácilmente Cómo hacer todo esto se describe detalladamente en este manual.
GUÍA RÁPIDA: NAVEGACIÓN Y CÁMARA Probar su móvil Uso de la cámara Muy bien. La tarjeta SIM ya está en el microteléfono y la batería está cargada (véase “Funcionamiento básico”, p.8). Encender el teléfono: Mantenga pulsada la tecla roja durante dos segundos (se deberá hacer lo mismo para apagarlo). Navegación y selección: El GX10i utiliza iconos para facilitarle la navegación (igual que en su PC). •Pulse la tecla plateada central para acceder a los iconos del menú principal.
GUÍA RÁPIDA: ENVÍO DE MENSAJES Y JUEGOS 3. Se le pedirá su confirmación sobre el tamaño del archivo: seleccione “Sí”, pulse y observe cómo se envía. Utilice la función MMS (Servicio de mensajes multimedia) para enviar su fotografía junto con un mensaje de texto. 1. Desde el menú principal, desplácese hacia arriba hasta “Mensajes”. 2. Pulse y seleccione “MMS”. 3. Pulse y seleccione “Mensaje nuevo”. 4. Pulse y escriba un mensaje de texto.
GUÍA RÁPIDA: TONOS DE LLAMADA Y PORTAL Tonos de llamada polifónicos Acceso al portal Vodafone live! El Sharp GX10i viene con una amplia gama de fascinantes tonos de llamada cargados para que usted los pruebe. 1. Su teléfono móvil está configurado para utilizar el navegador de Internet para móviles. En la pantalla de inicio podrá ver el logotipo de Vodafone live! en la parte inferior derecha. Pulse para seleccionarlo y con ello se iniciará el proceso de conexión (véase la sección de Vodafone, p.105). 2.
HANDLEIDING VOOR DE SNELLE BEGINNER: INLEIDING Meer dan spraak en tekst - nu ook beelden, muziek en games! Gefeliciteerd met uw nieuwe Sharp GX10i. Met deze geavanceerde telefoon kunt u veel meer doen dan alleen praten en teksten verzenden en ontvangen. U kunt nu volledig profiteren van alle nieuwe diensten van Vodafone live! In deze handleiding wordt gedetailleerd beschreven hoe u dat allemaal kunt doen.
HANDLEIDING VOOR DE SNELLE BEGINNER: NAVIGATIE & CAMERA Uw telefoon uitproberen OK. Uw SIM-kaart zit in de telefoon en u heeft de batterij opgeladen (zie “Beginnen”, p.8). De telefoon aanzetten: Druk op de rode toets en houd deze twee seconden ingedrukt (doe dit ook als u de telefoon wilt uitzetten). Navigeren en selecteren: De GX10i gebruikt symbolen die u helpen bij het navigeren (zoals op uw PC). •Druk op de middelste zilveren toets om toegang te krijgen tot de symbolen van het hoofdmenu.
HANDLEIDING VOOR DE SNELLE BEGINNER: FOTO'S VERZENDEN & GAMES Foto's verzenden Gebruik de functie MMS (Multi Media Messaging) om uw foto samen met een tekstbericht te verzenden. 1. Schuif in het hoofdmenu omhoog naar “Berichten”. 2. Druk op en selecteer “MMS”. 3. Druk op en selecteer “Opstellen”. 4. Druk op en schrijf uw tekstbericht.
HANDLEIDING VOOR DE SNELLE BEGINNER: RINGTONES & PORTAL Polyfone ringtones Naar de Vodafone live!-portal gaan De Sharp GX10i is uitgerust met een verbazingwekkende reeks vooraf geïnstalleerde ringtones die u direct kunt uitproberen. 1. Uw telefoon is al ingesteld voor gebruik van de browser voor het mobiele Internet. Op het opstartscherm ziet u rechtsonder het Vodafone live!-logo . Druk op om dit te selecteren, waarna verbinding wordt gezocht (zie het hoofdstuk Vodafone, p.105). 2.
GUIA DE INÍCIO RÁPIDO: INTRODUÇÃO Mais do que apenas voz e texto - agora há imagens, música e jogos! Parabéns pelo seu novo Sharp GX10i. Com este avançado telemóvel poderá fazer muito mais do que apenas “falar e escrever”.
GUIA DE INÍCIO RÁPIDO: NAVEGAÇÃO E CÂMARA Experimentar o seu telefone Pronto. Já introduziu o seu cartão SIM no telemóvel e a bateria está carregada (consulte “Apresentação”, na página 8). Ligar o telemóvel: Prima a tecla vermelha durante dois segundos (siga o mesmo processo para desligar). Navegação e selecção: O GX10i utiliza ícones para ajudá-lo a navegar (tal como num PC). •Prima a tecla central de cor prateada para aceder aos ícones no Menu principal.
GUIA DE INÍCIO RÁPIDO: MENSAGENS E JOGOS Enviar mensagens com fotografias Utilize a função de mensagens multimédia (MMS) para enviar uma fotografia juntamente com uma mensagem de texto. 1. A partir do Menu principal avance até “Mensagens”. 2. Prima e seleccione “MMS”. 3. Prima e seleccione “Compor”. 4. Prima e escreva a sua mensagem de Shoot texto. Anexar uma fotografia: 1. Prima [Opções]. Seleccione “Imagem” e prima . Sugestão: Experimente enviar uma mensagem para si próprio para ver como funciona.
GUIA DE INÍCIO RÁPIDO: TOQUES DE CHAMADA E PORTAL Toques polifónicos Aceder ao portal Vodafone live! O Sharp GX10i está já equipado com uma gama de toques de chamada espectaculares, carregados no seu telemóvel e prontos a utilizar. 1. O seu telefone já está configurado para utilizar o Browser da Internet móvel.
SNABBGUIDE: INLEDNING Inte bara röst och text - nu finns det bilder, musik och spel också! Till exempel: • Ta och skicka färgfoton • Spela arkadspel av hög kvalitet • Imponera på dina vänner med polyfona ringsignaler • Få åtkomst till Vodafone live! snabbt och enkelt Denna handbok beskriver i detalj hur du gör allt detta. Men om du redan känner till hur en mobiltelefon fungerar vill du kanske pröva alla nya funktioner direkt - allt det du inte kunnat göra förut.
SNABBGUIDE: NAVIGERING & KAMERA Prova telefonen Använda kameran OK. Ditt SIM-kort sitter i telefonen och batteriet är laddat (se “Komma igång”, s. 8). Slå på telefonen: Håll ned den röda -knappen i två sekunder (stäng av på samma sätt). Bläddra och välj: GX10i-telefonen har ikoner som hjälper dig att navigera (precis som en dator). •Tryck på silverknappen i mitten för att komma till ikonerna på huvudmenyn. •Använd för att flytta uppåt eller nedåt i menyerna på skärmen och eller för att välja.
SNABBGUIDE: MEDDELANDEN & SPEL Bildmeddelanden Bifoga ett foto: 1. Tryck på [Alternativ]. Välj “Bild” och tryck på . 2. Välj önskat foto. Tryck på . 3. Tryck på [Tillbaka] för att gå tillbaka till meddelandet. Shoot Obs: Upprepa samma steg, men välj “Ljud” i stället för “Bild” om du vill bifoga ett ljud - till exempel ett röstmemo som du spelat in (se avsnitt M 5-4, s. 75 om hur du spelar in). Skicka: Från textinmatningsskärmen: 1.
SNABBGUIDE: RINGSIGNALER & PORTAL Polyfona ringsignaler Öppna Vodafone live!-portalen Sharp GX10i levereras med en lång rad fantastiska ringsignaler redan installerade som du kan prova. 1. Telefonen är redan förberedd för att använda bläddraren för Vodafone live!. På startskärmen ser du Vodafone live!logotypen längst ned till höger. Tryck på för att välja den så startas anslutningsprocessen (se avsnitt Vodafone, s. 105). 2.
GYORS KEZELÉSI ÚTMUTATÓ: BEVEZETÉS Nemcsak hang és szöveg – mostantól képek, zene és játékok is! Gratulálunk az új Sharp GX10i készülékéhez. Ezzel a magas szintű készülékkel már nem csak „szövegelni” fog tudni - mostantól az új Vodafone live! szolgáltatások teljes körét élvezheti. Minderről részletes leírást talál a kézikönyvön belül. Ha azonban már járatos a mobiltelefon működése terén, akkor szinte alig várja már, hogy kipróbálhassa az új funkciókat – melyekre korábban nem volt lehetősége. ...
GYORS KEZELÉSI ÚTMUTATÓ: NAVIGÁLÁS ÉS FÉNYKÉPEZŐGÉP A telefon kipróbálása Nos, a SIM kártya a készülékben van, az akkumulátort feltöltötte (lásd „Kezdö lépések” 8. oldal). Bekapcsolás: Tartsa nyomva a piros gombot két másodpercen át (kikapcsolás ugyanígy). Navigálás és kiválasztás: A GX10i ikonokkal segíti a navigálást (a számítógéphez hasonlóan). •A középső ezüst gomb megnyomásával érheti el a Főmenü ikonjait. •A és a gombokkal lépegethet a képernyőn lévő menükben. A kiválasztás a vagy a gombbal történik.
GYORS KEZELÉSI ÚTMUTATÓ: ÜZENETKÜLDÉS ÉS JÁTÉKOK Képek küldése üzenettel Fénykép csatolása: 1. Nyomja meg az [Opciók] gombot. A „Kép beszúrása” pont kiválasztása után nyomja meg a gombot. 2. Válassza ki a kívánt fényképet. Nyomja meg a gombot. 3. Az üzenethez a [Vissza] gombbal léphet vissza. Megjegyzés: Ha a „Kép beszúrása” helyett a „Hang beszúrása” pontot választja, akkor hangot, pl. egy hangjegyzetet csatolhat az üzenethez (a hangfelvételről lásd az M 5-4 Fejezetet a 75. oldalon).
GYORS KEZELÉSI ÚTMUTATÓ: CSENGŐHANGOK ÉS A PORTÁL Többszólamú csengőhangok Csatlakozás a Vodafone live! portálhoz A Sharp GX10i telefonra több bámulatos csengőhangot is előre feltöltöttünk. 1. Az Ön telefonja eleve be van állítva a mobil internetes böngésző használatára. Az induló képernyőn jobbra lent látható a Vodafone live! emblémája. A gombbal választhatja ezt ki, és ezzel elindul a csatlakozás (lásd a Vodafone fejezetet a 105. oldalon). 2.