User guide

30 Call Functions
Redialing
1. Press during standby.
2. Select the phone number you wish to call.
3. Press to redial the call.
Automatic Redialing
This setting allows you to automatically redial the
number if the first attempt was unsuccessful because
the called party was busy.
If you wish to stop redialing, press or [End].
To Set the Auto Redial Function
“Settings”
→ “Call Settings” → “Auto Redial”
1. Select “On” or “Off”.
Note
• When you receive an incoming call, the Auto Redial
function is interrupted.
• Automatic redialing is not available for fax and data
calls.
Answering a Call
When an incoming call is detected, the phone rings.
1. Press , or [Answer] to answer the call.
Tip
• When the Personal Hands-free Kit (option) is
connected to the phone, you can answer calls by
pressing the Answer button.
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number is displayed on
the screen. If the caller’s name and number are
stored in the Contacts List, the caller’s name and
phone number are displayed on the screen.
• If the number is a restricted number, the display
shows “Withheld”.
• When receiving a call from the person whose picture
is registered in the Contacts List, receiving display
and the picture are displayed alternately.