User guide

Camera 47
Using the Zoom Function
Press or to change the zooming ratio.
Zooming ratio indicators
: Magnification.
Note
• When “Picture Size” is set to “S (128
∗ 160)”, the
zoom function has 3 magnifications (
× 1, × 2, × 4).
• When “Picture Size” is set to “M (240
∗ 320)”, the
zoom function has 2 magnifications (
× 1, × 2).
Selecting the Picture Size
“Camera”
→ “Take Picture” → [Options] →
“Picture Size”
1. Select the desired picture size.
Selecting the Picture Quality
“Camera”
→ “Take Picture” → [Options] →
“Picture Quality”
1. Select “Normal” or “Fine”.
Picture quality indicators
:Fine
:Normal
Selecting the Anti-flicker Mode
“Camera”
→ “Take Picture” → [Options] → “Anti-
flicker”
1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.
Note
• Vertical stripes may occur on the picture due to the
light source. Change the anti-flicker mode to rectify.
• The digital camera uses a C-MOS sensor. Although
this camera has been manufactured to the highest
specifications, some pictures may still appear too
bright or too dark.
• If the phone has been left in a hot place for a long
time before taking or registering a picture, the
picture quality may be poor.
In the Case of No Available Memory
When the number of pictures that can be taken becomes
3 or less, the remaining shots indicator in the upper left
of the screen turns red. (The number of pictures that can
be taken is approximate.)
When the number of pictures that can be taken becomes
0, and when you try to take a picture again, “Memory
full. Please delete some data!” is displayed.
Adjusting the Brightness of the Picture
According to Lighting Conditions
Press or to adjust the brightness of the picture.
Picture brightness (exposure level) indicators
: (Bright → Normal
→ Dark)
Once the phone has returned to the standby screen, the
brightness settings return to default.