User guide

88 Settings
Connectivity
By configuring the settings in this menu, you can
connect to Bluetooth wireless technology enabled
phones, as well as PCs.
Using the Bluetooth Wireless Function
To Turn On or Off
“Settings”
→ “Connectivity” → “Bluetooth” →
“Switch On/Off”
1. Select “On” or “Off”.
The Bluetooth wireless setting is activated, and
“ ” is displayed.
To Search for Devices to be Paired
For using the Bluetooth wireless function, you need to
search for other Bluetooth wireless technology enabled
devices to establish contact with your phone. Keep your
phone within a distance of 10 metres before searching.
“Settings”
→ “Connectivity” → “Bluetooth” →
“Search for Devices”
The phone starts searching for devices within 10
metres.
1. Select the desired device for pairing.
2. Enter the device passcode.
Note
• Pairing means “Authentication”.
• The users of two devices with Bluetooth wireless
technology should agree on the same passcode for
both devices in order to pair them.
• The passcode is used just once, there is no need to
remember it. The passcode can be different each time
the devices are connected.
• Devices that do not have a user interface have a
factory-set passcode (i.e. headsets and car kits - see
the device user guide).
• If the Bluetooth wireless function is off before
searching, the phone turns the Bluetooth wireless
function on automatically and starts searching.
• When you wish to perform the device search again,
the device list where all devices searched will be
displayed when selecting “Search for Devices”
again in step 1. Highlighting “New Devices” at the
top of the list and pressing will resume the new
search and refresh the list.
• You can only select one device for pairing. To change
the paired device else, see “Handsfree Devices“ on
this page.
Handsfree Devices
You can activate, rename, and delete the paired
handsfree device in the list.
(M 9-4)
(M 9-4-1)