User guide

126 Profiles
Vibration
When the vibrator option is set on, the phone will
vibrate for incoming calls regardless of the ringer
volume and tone settings.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 124.
2. Press or to highlight “Vibration”, then press
to select.
3. Press or to highlight “Enable”, “Disable” or
“Link to Sound”, then press to select.
Tip
• When “Link to Sound” is selected in step 3, melodies
are synchronised with the vibrator for the ringtone.
However, this function may not work depending on
the data.
• When you select “Enable” or “Link to Sound” in step
3, “ ” is displayed on the stand-by screen.
Keypad Tones
When the keypad tone is set on, you will hear a
confirmation tone each time you press any keys.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 124.
2. Press or to highlight “Keypad Tones”, then
press to select.
3. Press or to highlight “On” or “Off”, then
press to select.
If you select “Off”, the screen returns to step 1.
4. Press or to highlight “Volume”, then press
to select.
5. Press to increase the volume or press to
decrease the volume, then press .
6. Press or to highlight “Tone”, then press
to select.
7. Press or to highlight either “Preset
Melodies”, “My Sounds” or “Default Tone”, then
press to select.
If you select “Preset Melodies” or “My Sounds” in step
7, perform the following, otherwise go to step 9.