User guide

36 Contacts List
When you wish to change the Contacts List memory
6. After performing steps 1 to 5, press or to
highlight “Source”, then press to select.
7. Press or to highlight “Handset” or “SIM”,
then press to select.
Creating a New Entry
You can choose either the phone (up to 500) or SIM
card memory locations to store the new entry. For
switching locations, see “Selecting the Contacts List
Memory” on page 35.
The amount of phone numbers that you can store to the
SIM card is dependent on its capacity. Contact your
network operator for details.
If you create a new entry in the handset memory, you
need to enter one of the following: “Name”, “Phone
number” or “E-mail Address”. If you create a new entry
on the SIM card, you need to enter: “Phone number”.
1. Perform steps 1 to 7 in “Selecting the Contacts List
Memory” on page 35 to change the memory.
Steps 11 to 21 in this section cannot be performed if
you use the SIM card for storing a new entry.
2. Press to display the Main menu.
3. Press , , or to highlight “Contacts”,
then press to select.
4. Press or to highlight “Contacts List”, then
press to select.
5. Press A [Options] to display the Options menu.