User guide

90 Settings
Settings
Connectivity
By configuring the settings in this menu, you can
connect to Bluetooth wireless technology or infrared
enabled phones via these connections, as well as a PC
via Bluetooth wireless technology, infrared or USB
connections.
Using the Bluetooth Wireless Function
To Turn On or Off
“Settings”
→ “Connectivity” → “Bluetooth” →
“Switch On/Off”
1. Select “On” or “Off”.
If the infrared setting has been activated, you will be
asked whether you wish to deactivate it or not. Press
[Yes].
The Bluetooth wireless setting is activated, and
“ ” is displayed.
Tip
• You can turn the Bluetooth wireless function on or off
by pressing , then R during standby.
To Search for Devices to be Paired
For using the Bluetooth wireless function, you need to
search for other Bluetooth wireless technology enabled
devices to establish contact with your phone. Keep your
phone within a distance of 10 metres before searching.
“Settings”
→ “Connectivity” → “Bluetooth” →
“Search for Devices”
The phone starts searching for devices within 10
metres.
1. Select the desired device for pairing.
2. Enter the device passcode.
Note
• If the Bluetooth wireless function is off before
searching, the phone turns the Bluetooth wireless
function on automatically and starts searching.
• If the infrared function is active, the confirmation
screen to deactivate the infrared function is
displayed. Press [Yes] to deactivate.
• You can only select one device for pairing. To change
the paired device, see “Handsfree Devices” on
page 91.
(M 9)
(M 9-1)
(M 9-1-1)