Operation Manual

42 Camera
Continuous Shoot
Four pictures are taken in succession. Auto Shoot and
Manual Shoot are available.
Continuous Shoot indicators
“Camera”
“Take Picture”
[Options]
“Continuous Shoot”
1. Select “Auto Shoot” or “Manual Shoot”.
Select “Off” to cancel.
2. Press e or the side-down key to start Continuous
Shoot.
Auto Shoot: Four pictures are taken in a row.
Manual Shoot: Pictures are taken one by one by
pressing e or the side-down key.
The taken pictures are saved automatically.
To stop Continuous Shoot, press [Cancel].
Note
When “Picture Size” is set to “L”, you cannot use the
Continuous Shoot function.
When you select a frame for taking pictures, you
cannot use the Continuous Shoot function.
Delay timer cannot be used with the Manual Shoot
function.
Selecting a Frame
You can select the frame from preset patterns. You can
also select a frame in Saved Pictures.
“Camera”
“Take Picture”
[Options]
“Add
Frame”
1. Select “Preset Frames” or “My Pictures”.
2. Select the desired frame.
The selected frame is confirmed on the display.
3. Press e.
Note
When “Picture Size” is set to “L”, you cannot use the
Frame function.
When you activate the Continuous Shoot, you cannot
use the Frame function.
Only images in PNG format can be selected as the frame
if you select “My Pictures” in step 1. However, images
larger than the picture size which you select cannot be
used.
:
When pictures are taken in Continuous Shoot
mode, these indicators appear on the screen.
* When delay timer and Continuous Shoot
functions are simultaneously set, “ ” is
displayed instead.