Operation Manual

104 My Stuff
Changing the File Name
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 102.
2. Press a or b to highlight the file name you wish
to change, then press A [Options].
The Options menu is displayed.
3. Press a or b to highlight “Rename”, then press
or
A
[Select] to select.
4. Enter a new file name.
To delete the last character, press C [Clear] briefly.
Press and hold C [Clear] to clear all characters.
5. Press .
Note
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, >, | and . (full-stop).
(Full-stop can be used for sound files in the memory
card.)
Tip
• When “Edit Data” is displayed in the menu in step 2,
you are able to edit the sound (p. 134). Once you
have completed editing the newly saved file
overwrites the old file. This new file then becomes the
original ringtone.
Setting the Tone and Strength
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 102.
2. Press a or b to highlight the file name you wish
to edit, then press A [Options].
The Options menu is displayed.
3. Press a or b to highlight “Set Tone” or “Set
Strength”, then press or A [Select] to select.
For full details, see pages 131 to 134.
Note
• If “Set Tone” and “Set Strength” are not displayed
in the menu in step 2, you cannot change these
settings.
Sending Messages
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 102.
2. Press a or b to highlight the file name you wish
to send, then press
A
[Options].
The Options menu is displayed.
3. Press a or b to highlight “Create Message”, then
press or
A
[Select] to select.
If you select your original ringtone in step 2, perform
the following, otherwise go to step 5.