Operation Manual

114 Games & More
2. Press a or b to highlight “Backlight”, then press
to select.
3. Press a or b to highlight “On/Off”, then press
to select.
4. Press a or b to highlight “On”, “Off” or “Normal
Settings”, then press to select.
To Set the Blinking Operation
This setting enables the backlight to be controlled by
the application. If set to “Off”, the backlight cannot be
turned on from the application.
1. Perform steps 1 to 3 in “Opening the Settings
Screen” on page 112.
2. Press a or b to highlight “Backlight”, then press
to select.
3. Press a or b to highlight “Blink”, then press
to select.
4. Press a or b to highlight “On” or “Off”, then
press to select.
Vibration
When the vibrator is set in the application, you can
choose whether the operation is enabled or disabled.
When a SMAF file is specified in the application, you
can operate the vibrator set in the SMAF file.
Note
• SMAF (Synthetic music Mobile Application Format)
is a music data format for mobile phones.
1. Perform steps 1 to 3 in “Opening the Settings
Screen” on page 112.
2. Press a or b to highlight “Vibration”, then press
to select.
3. Press a or b to highlight “Enable”, “Disable” or
“Link to Sound”, then press to select.
When you set “Link to Sound”, the sound of SMAF
file in the application is synchronised with the
vibrator.
(M 1-4-4)