Operation Manual

122 Applications
9. Press a or b to highlight “On”, then press to
select.
10. Press C [Save].
To Change the Type of Alarm Tone
1. Perform steps 1 to 5 in “Setting the Alarms” on
page 121.
2. Press a or b to highlight “Alarm Tone”, then
press to select.
3. Press a or b to highlight “Tone”, then press
to select.
4. Press a or b to highlight “Preset Sounds” or “My
Sounds”, then press to select.
5. Press a or b to highlight the alarm tone.
If you wish to hear the demo play, press .
To stop playing, press .
6. When selection is complete, press A [Options] to
display the Options menu.
7. Press a or b to highlight “Assign”, then press
or A [Select] to select.
To Change the Vibration of the Alarm
1. Perform steps 1 to 5 in “Setting the Alarms” on
page 121.
2. Press a or b to highlight “Alarm Tone”, then
press to select.
3. Press a or b to highlight “Vibration”, then press
to select.
4. Press a or b to highlight “Enable”, “Disable” or
“Link to Sound”, then press to select.
To Change the Duration of the Alarm
1. Perform steps 1 to 5 in “Setting the Alarms” on
page 121.
2. Press a or b to highlight “Alarm Tone”, then
press to select.
3. Press a or b to highlight “Duration”, then press
to select.
The current duration is displayed.
4. Enter the length of the duration in 2 digits (02 to 59
seconds) using the digit keys, then press .