Operation Manual

140 Profiles
Vibration
When the vibrator option is set on, the phone will
vibrate for incoming calls regardless of the ringer
volume and tone settings.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 138.
2. Press a or b to highlight “Vibration”, then press
to select.
3. Press a or b to highlight “Enable”, “Disable” or
“Link to Sound”, then press to select.
Tip
• When the “Link to Sound” option is selected in step
3, the vibrator synchronises with your selected
melody to pulse in time with the melody. Please note
that not all melodies support the “Link to Sound”
option. Should you select such a melody, only the
“Enable” option in step 3 will allow vibrator
function.
• When you select “Enable” or “Link to Sound” in step
3, “ ” is displayed on the stand-by screen.
Light Colour
You can select from 7 colours and 1 pattern for each
profile and change it during an incoming call.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 138.
2. Press a or b to highlight “Light Colour”, then
press to select.
3. Press a or b to highlight the desired light colour
or pattern, then press to select.
Tip
• If you select “Disco” in step 3, all 7 colours flash in
order during an incoming call.
Keypad Tones
When the keypad tone is set on, you will hear a
confirmation tone each time you press any keys.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 138.
2. Press a or b to highlight “Keypad Tones”, then
press to select.