Operation Manual

Settings 169
5. Press a or b to highlight “On”, then press to
select.
6. If you wish to divert calls to a number which is
located in the Contacts List, search for the desired
Contacts List entry.
Press a or b to display the Contacts List. Then
press a or b to highlight the desired entry, then
press to select. For details on searching the
Contacts List entries, perform steps 1 to 4 in
“Finding a Name and Number” on page 43.
7. If you wish to divert calls to a number which you
can enter manually, enter the phone number.
8. Press .
If you select “No Answer” in step 4:
9. Press a or b to highlight the period of time from
6 levels (05 to 30 seconds), then press to select.
Note
• When a divert is set to “All Calls”, “ ” is displayed
on the stand-by screen.
Tip
• If you select “By Service” in step 5, you can select
further divert options in the selected option in step 4.
Checking the Divert Status
1. Perform steps 1 to 3 in “Diverting Calls” on
page 168.
2. Press a or b to highlight the divert option you
wish to check, then press to select.
3. Press a or b to highlight “Status”, then press
to select.
You can now check the status of the selected divert
option.
4. When you have finished, press C [Back].
Cancelling All Divert Settings
1. Perform steps 1 to 3 in “Diverting Calls” on
page 168.
2. Press a or b to highlight “Cancel All”, then press
to select.
3. Press A [Yes].
All divert settings are cancelled.
To cancel resetting, press C [No] in step 3.
(M 9-3-5)