Operation Manual

Settings 183
6. Enter the country code, then press .
7. Enter the network code, then press .
8. Enter a new network name and press .
Editing the Preferred List
To Change the Position of a Network in the
Preferred List
1. Perform steps 1 to 3 in “Opening the Network
Settings Screen” on page 182.
2. Press a or b to highlight “Select Network”, then
press to select.
3. Press a or b to highlight “Set Preferred”, then
press to select.
4. Press a or b to highlight the name of the network
to change the position from the list, then press
to select.
5. Press a or b to highlight “Insert” or “Add to end”,
then press to select.
To Delete a Network from the Preferred List
1. Perform steps 1 to 3 in “Opening the Network
Settings Screen” on page 182.
2. Press a or b to highlight “Select Network”, then
press to select.
3. Press a or b to highlight “Set Preferred”, then
press to select.
4. Press a or b to highlight the name of the network
to delete, then press to select.
5. Press a or b to highlight “Delete”, then press
to select.
Changing the Network Password
1. Perform steps 1 to 3 in “Opening the Network
Settings Screen” on page 182.
2. Press a or b to highlight “Change Password”,
then press to select.
3. Enter the old password, then press .
4. Enter a new password, then press .
5. Enter a new password again, then press .
If you enter the incorrect password in step 5, the
screen will return to step 2 and you are asked to
enter the password again.
6. Press .
(M 9-7-2)