Operation Manual

Settings 187
6. Enter the network password, then press .
To change the network password, see “Changing
the Network Password” on page 183.
The selected call barring function is activated.
If you enter a wrong network password, the entered
password is cleared. Enter the correct password.
To Cancel All Call Barring Settings
1. Perform steps 1 to 3 in “Opening the Security
Screen” on page 184.
2. Press a or b to highlight “Call Barring”, then
press to select.
3. Press a or b to highlight “Cancel All”, then press
to select.
4. Enter the network password, then press .
All call barring settings are cancelled.
To Cancel the Call Barring Setting Individually
1. Perform steps 1 to 3 in “Opening the Security
Screen” on page 184.
2. Press a or b to highlight “Call Barring”, then
press to select.
3. Press a or b to highlight the call barring option,
then press to select.
4. Press a or b to highlight the call barring option
you wish to cancel, then press to select.
5. Press a or b to highlight “Off”, then press to
select.
6. Enter the network password, then press .
The selected call barring setting is cancelled.
Fixed Dialling No. (M 9-8-5)
When the Fixed Dialling No. is enabled, you can only
call predefined numbers.
To Enable Fixed Dialling No.
1. Perform steps 1 to 3 in “Opening the Security
Screen” on page 184.
2. Press a or b to highlight “Fixed Dialling No.”,
then press to select.
3. Enter a PIN2 code, then press .
4. Press a or b to highlight “Settings”, then press
to select.
5. Press a or b to highlight “On”, then press to
select.
If you select “Off”, Fixed Dialling No. is disabled.