Operation Manual

192 Connecting GX30 to Your PC
Software Installation
1. Insert the supplied CD-ROM into your CD-ROM
drive.
The GX30 CD-ROM screen is displayed.
If the GX30 CD-ROM screen is not displayed,
double-click [Launcher.exe] in your CD-ROM.
2. Press the desired button.
The installation starts.
3. Follow the on-screen instructions to complete
installation.
Note
Infrared communication
• Infrared ports need to be aligned with each other.
• Infrared ports need to be placed within 20 cm of each
other and within a 30° angle.
• It is not recommended that you make or answer a call
during data transmission. The operation may be
interrupted.
GSM/GPRS modem
• It is not recommended that you make or answer calls
when you are using GX30 as a GSM/GPRS modem.
The operation may be interrupted.
• When transmitting data via infrared communication,
you need to set the infrared setting to “On”. (p. 175)
Handset Manager
• Some large files may not be able to be transmitted
from the PC to the phone.
•
When connecting your phone to a PC, you need to
select the connection method for PC Software.
(p. 175)
Infrared port