Operation Manual

Call Functions 29

Conference Call

Conference call is a call with more than 2 participants.

You may include up to 5 participants in a conference

call.

To Make a Conference Call

To make a conference call, you must have one active

call and one held call.

1. Press A [Options] to display the Options menu.

2. Press a or b to highlight “Multiparty”, then press

[Select] to select.

3. Press a or b to highlight “Conference All”, then

press to join the conference call.

4. Press F to end the conference call.

Note

• Conference call service may not be available on all

networks. Contact your network operator for more

information.

• You have more options for the Conference call in step

• To put all participants on hold, select “Conference

Hold All”.

• To put all participants except the current call on

hold, select “Private”.

• To end the call with all participants, select

“Release All”.

• To disconnect from the conference call but still

allow the other participants to continue talking

together, select “Transfer”.

• To put the current call on hold and continue to

have a conference call with the remaining

participants, select “Exclude”.

• To reject adding more participants to the current

party, select “Reject”, or you can send the busy

tone by selecting “Busy”.