Operation Manual
Camera 53
Taking Close-up Pictures
1. In digital camera mode, set the macro switch to the
macro position ( ).
2. Press or the side-down key to take the picture.
To cancel macro mode, set the macro switch to the
normal position ( ).
Using the Zoom Function
Press c or d to change the zooming ratio.
Note
• When “Picture Size” is set to “S”, the zoom function
has 20 steps.
• When “Picture Size” is set to “M”, the zoom function
has 10 steps.
• When “Picture Size” is set to “L”, the zoom function
has 5 steps.
• When “Picture Size” is set to “XXL” or “XL”, you
cannot use the zoom function.
Selecting the Picture Size
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press a or b to highlight “Picture Size”, then
press or A [Select] to select.
3. Press a or b to highlight the picture size, then
press to select.
Selecting the Picture Quality
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press a or b to highlight “Picture Quality”, then
press or A [Select] to select.
3. Press a or b to highlight “Normal” or “Fine”,
then press to select.
Retaking Pictures
After steps 1 to 4 in “Taking Pictures” on page 52, press
C [Cancel].
Further shooting is available.
Note
• The digital camera uses a CCD sensor. Although this
camera has been manufactured to the highest
specifications, some pictures may still appear too
bright or too dark.
• If the phone has been left in a hot place for a long
time before taking or registering a picture, the
picture quality may be poor.