Operation Manual

58 Camera
Note
• When “Picture Size” is set to “XXL”, “XL” or “L”,
you cannot use the Continuous Shooting function.
• When you select a frame for taking pictures, you
cannot use the Continuous Shooting function.
• Delay timer cannot be used with the Manual
Shooting setting.
Selecting a Frame
You can select the frame from preset patterns. You can
also select a frame in the handset memory or in the
memory card.
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press a or b to highlight “Add Frame”, then press
or
A
[Select] to select.
3. Press a or b to highlight “Preset Frames” or “My
Pictures”, then press to select.
If you have selected “My Pictures”, press a or b
to highlight “Handset Memory” or “Memory Card”,
then press to select.
4. Press a or b to highlight the frame you wish to
use, then press to select.
The selected frame is confirmed on the display.
5. Press .
Note
• When “Picture Size” is set to “XXL”, “XL” or “L”,
you cannot use the Frame function.
• When you activate the Continuous Shooting function,
you cannot use the Frame function.
• Only the images of PNG format can be selected as the
frame if you select “My Pictures” in step 3.
Selecting Light Colour
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press a or b to highlight “Light Colour”, then
press or
A
[Select] to select.
3. Press a or b to highlight the desired colour, then
press to select.
To turn off the flash light, select “Off”.
Tip
• Each time R or the side-up key is pressed, the status
of the flash light changes as follows.
Off
→ On (brightness for normal mode: ) → On
(brightness for macro mode: )
→ Off
• If you do not operate your phone for approximately
one minute, the flash light turns off automatically to
save the power.