Operation Manual
Camera 61
Recording Close-up Video Clips
1. In video camera mode, set the macro switch to the
macro position ( ).
2. Press or the side-down key to start recording the
video clip.
To cancel macro mode, set the macro switch to the
normal position ( ).
Using the Zoom Function
Zooming ratio can be altered approximately up to 3.5
times in 10 steps. Press c or d to change the zooming
ratio.
Selecting Video Quality
1. In video camera mode, press A [Options].
The Options menu is displayed.
2. Press a or b to highlight “Video Quality”, then
press or
A
[Select] to select.
3. Press a or b to highlight “Normal” or “Fine”,
then press to select.
Selecting the Recording Time Mode
You can select the recording time mode.
1. In video camera mode, press
A
[Options].
The Options menu is displayed.
2. Press a or b to highlight the “Record Time”, then
press or
A
[Select] to select.
3. Press a or b to highlight “Extended Video” or
“For Message Sending”, then press to select.
Note
• If “For Message Sending” is selected, the size of the
video clip that can be recorded depends on the
message size set in MMS settings (p. 77).
• “Save and Send” is not displayed after recording in
extended video mode.