Operation Manual

72 Messages
To Check the Sender and Receiver Phone
Number or E-mail Address
1. Perform steps 1 to 3 in “Incoming Messages” on
page 71.
2. Press a or b to highlight the desired message,
then press A [Options] to display the Options
menu.
3. Press a or b to highlight “Details”, then press
or
A
[Select] to select.
The sender’s phone number or e-mail address, time
and date stamp, subject and size are displayed.
Replying to a Message from the Sender from
the Inbox
1. Press A during stand-by.
2. Press a or b to highlight “Multimedia”, then
press to select.
3. Press a or b to highlight “Inbox”, then press
to select.
4. Press a or b to highlight the message to which
you wish to reply.
5. Press A [Options] to display the Options menu.
6. Press a or b to highlight “Reply”, then press
or A [Select] to select.
7. Enter your message.
For details on entering characters, see “Entering
Characters” on page 32.
8. Press .
The phone number or e-mail address of the recipient
is automatically filled in the sender’s phone number
or e-mail address.
9. Press .
The subject field is automatically filled in with the
original subject preceded by “Re:”.
10. Press a or b to highlight “Send”, then press to
select.
Tip
• You can reply to a message to all addresses of
selected messages by selecting “Reply All” in step 6.