Operation Manual

84 Messages
Connection Type
1. Perform steps 1 to 3 in “Setting Up SMS” on
page 83.
2. Press a or b to highlight “Connection Type”, then
press to select.
3. Press a or b to highlight the connection type, then
press to select.
Optimisation
When set “On” (default), double-byte characters such
as European characters with an accent are converted
into single-byte characters and sent.
When “Off”, double-byte characters are sent as
displayed.
Please note that you may be charged double for double-
byte characters sent in an SMS when Optimisation is set
“Off”.
1. Perform steps 1 to 3 in “Setting Up SMS” on page
83.
2. Press a or b to highlight “Optimisation”, then
press to select.
3. Press a or b to highlight “On” or “Off”, then
press to select.
Cell Broadcasts
You can receive Cell Broadcast messages or general
messages such as weather forecasts and traffic reports.
This information is broadcast to subscribers in certain
network areas.
This function may not be available on all mobile phone
networks. Contact your network operator for more
information.
Enabling/Disabling Cell Broadcasts (M 4-7-1)
1. Press A during stand-by.
2. Press a or b to highlight “Cell Broadcasts”, then
press to select.
3. Press a or b to highlight “On/Off”, then press
to select.
4. Press a or b to highlight “On” to set Cell
Broadcasts on or “Off” to set it off, then press to
select.
(M 4-7)