Service manual

GX30
2 – 20
CONFIDENTIAL
4.5.2 Default setting for the program.
• Activate the program and set defaults.
Figure 44
1) Select the COM port.
2) Set the GPIB No.
3) Select the test instrument.
4) Set the GPIB address.
5) Set the "Cable Offset" values.
GSM 900: 0.60
DCS 1800: 0.95
PCS 1900: 0.96
GSM 850: 0.60
For cables with connector
QCNWK0138AFZZ/
QCNWK0136AFZZ, set the
values as follows:
6) Auto Dial Setting
When the Auto Dial check
box is checked, an entered
number is automatically
dialed for performance
check.
7) Number Setting
Enter a number for Auto Dial.