Service manual

GX30
3 – 4
CONFIDENTIAL
[2] Disassembly and reassembly
• To reassemble, follow the reverse procedure.
Figure 1
Figure 2
Figure 3
Figure 4
STEP REMOVAL PROCEDURE FIGURE
1 Back Cabinet
(Key) Ass’y
1.Battery Cover........
2.Li-Ion Battery.........
3.Screw Cover..........
4.Screw....................
5.Hook.....................
6.Hook.....................
(A1)x1
(A2)x1
(A3)x2
(A4)x4
(A5)x4
(A6)x1
1
2
2 SD Card Cover
Belt
1.Stoper...................
2.Hook.....................
(B1)x1
(B2)x4
3
3 Aerial 1.Aerial Cover..........
2.Hook.....................
(C1)x1
(C2)x1
4
Back Cabinet (Key)
Assembly
(A1) x 1
(A2) x 1
(A3) x 2
(A4) x 2
1.7x5mm
(A4) x 2
1.7x5mm
External Connector Cover
PULL
PUSH
Front Cabinet (Key)
Jig
(A5) x 2
(A6) x 1
1
(A5) x 2
Back Cabinet (Key) Assembly
SLIDE
SWING
UP
SLIDE
1
2
2
2
3
Remove the external connector cover.
Insert a jig into the slot and slightly lift up the back cabinet (key) assembly.
Insert jigs into the space.
Slide jigs on the both sides to release 4 hooks (A5).
(Use something flat and hard,
for example guitar picks.)
Move the cabinet assembly gently from side to side
to release the other hook (A6).
3
(B1) x 1
(B2) x 4
Back Cabinet (Key)
Assembly
SD Card Cover Unit
SD Card Cover
SD Card Cover Belt
Open the SD card cover and turn it as indicated by the arrow to release the stopper.
Then pull out the cover downward.
Remove the SD cover belt as instructed below.
1
2
3
4
(C1) x 1
(C2) x 1
Back Cabinet
(Key) Assembly
Aerial
PUSH
PULL
1
2