Operation Manual

Profiles 119
Assigning Ringtone
You can select the ringtone from 28 tones including 5
patterns, 3 alerts, 10 sound effects and 10 melodies.
You can also select a sound in the handset memory as
the default ringtone excluding the AMR/WAVE and
MP3 format.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 117.
2. Press a or b to highlight “Assign Ringtone”, then
press to select.
3. Press a or b to highlight “Preset Sounds” or “My
Sounds”, then press to select.
4. Press a or b to highlight the ringtone you wish to
use.
If you wish to hear the demo play, press .
To stop playing, press .
5. When selection is complete, press A [Options] to
display the Options menu.
6. Press a or b to highlight “Assign”, then press
or A [Select] to select.
Note
• If you delete a ringtone that uses a sound in the
handset memory, the default ringtone is set.
Vibration
When the vibrator option is set on, the phone will
vibrate for incoming calls regardless of the ringer
volume and tone settings.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 117.
2. Press a or b to highlight “Vibration”, then press
to select.
3. Press a or b to highlight “On”, “Off” or “On &
Link to Sound”, then press to select.
Tip
• When the “On & Link to Sound” option is selected in
step 3, the vibrator synchronises with your selected
melody to pulse in time with the melody. Please note
that not all melodies support the “On & Link to
Sound” option. Should you select such a melody, only
the “On” option in step 3 will allow vibrator
function.
• When you select “On” or “On & Link to Sound” in
step 3, “ ” is displayed on the standby screen.