Operation Manual

Settings 147
Connectivity
By configuring the settings in this menu, you can
connect to Bluetooth wireless technology or infrared
enabled phones via these connections, as well as a PC
via Bluetooth wireless technology, infrared or USB
connections.
Using the Bluetooth Function
Via the Bluetooth wireless connection, you can use the
following functions:
• Voice communication with the handsfree device.
• GSM/GPRS modem.
• Data exchange based on OBEX technology.
To Turn On or Off
1. Press to display the Main menu.
2. Press a, b, c or d to highlight “Settings”, then
press to select.
3. Press a or b to highlight “Connectivity”, then
press to select.
4. Press a or b to highlight “Bluetooth”, then press
to select.
If the infrared setting has been activated, you will be
asked whether you wish to deactivate it or not. Press
A [Yes].
5. Press a or b to highlight “Switch On/Off”, then
press to select.
6. Press a or b to highlight “On”, then press to
select.
The Bluetooth setting is activated, and “ ” is
displayed.
To Search for Devices to be Paired
For using the Bluetooth wireless function, you need to
search for other
Bluetooth wireless technology enabled
devices to establish contact with your phone. Keep your
phone within a distance of 10 metres before searching.
1. Perform steps 1 to 4 in “Using the Bluetooth
Function” on page 147.
2. Press a or b to highlight “Search for Devices”,
then press to select.
The phone starts searching for devices within 10
metres.
3. Press a or b to highlight the desired device for
pairing, then press to select.
4. Enter the device passcode, then press .
(M 9-5)
(M 9-5-1)