Operation Manual

44 Contacts List
For “Via Bluetooth”
The phone starts searching for Bluetooth wireless
technology enabled devices within 10 metres.
When detected, a list of enabled devices is displayed
allowing you to select the desired device. The
connection can be established and the entry sent.
For “Via Infrared”
The phone starts searching for an infrared-enabled
device within 20 centimetres.
When detected, the infrared connection is established
and the entry is sent.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time except
when “Authentication” (p. 150) is set to “Off”.
Receiving a Contacts List Entry
When the phone receives a Contacts List entry, a
confirmation message appears in the standby mode
screen.
1. Press A [Yes].
The received entry is registered in the Contacts List.
Press C [No] to reject.
Tip
• For details on making Infrared or Bluetooth wireless
settings, see “Connectivity” on page 147.
Dialling a Service Phone Number
Certain SIM cards contain service phone numbers that
can be dialled. Contact your SIM card vendor for more
information. On the Contacts screen, “Service Dialling
No.” is displayed at the bottom of the list.
1. Perform steps 1 and 2 in “Displaying the Contacts
List” on page 34.
2. Press a or b to highlight “Service Dialling No.”,
then press to select.
3. Press a or b to highlight the desired service phone
number, then press to select.
Tip
• If the SIM card contains only one service phone
number, you can dial it in step 2 by pressing .
• If no service phone number is stored in the SIM card,
this menu is not displayed.