Operation Manual

48 Camera
Selecting the Picture Quality
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press a or b to highlight “Picture Quality”, then
press or A [Select] to select.
3. Press a or b to highlight “Normal” or “Fine”,
then press to select.
Picture quality indicators
:Fine
:Normal
Retaking Pictures
After steps 1 to 4 in “Taking Pictures” on page 45, press
C [Cancel].
Further shooting is available.
Note
• The digital camera uses a CCD sensor. Although this
camera has been manufactured to the highest
specifications, some pictures may still appear too
bright or too dark.
• If the phone has been left in a hot place for a long
time before taking or registering a picture, the
picture quality may be poor.
In the Case of No Available Memory
When the number of pictures that can be taken becomes
3 or less, the remaining shots indicator in the upper left
of the screen turns red. (The number of pictures that can
be taken is approximate.)
Even if the number of pictures that can be taken
becomes 0, you can continue to take and save pictures
until the message, “Memory full. Please delete some
data!” appears. After which, you can choose the
memory for saving the picture.
Adjusting the Brightness of the Picture
According to Light Conditions
Press a or b to adjust the brightness of the picture.
Picture brightness (exposure level) indicators
: (Bright → Normal → Dark)
Once the phone has returned to the standby screen the
brightness settings return to default.