User's Manual

Settings 132
8. Press or to select “Enable”, “Disable” or
“Link to Sound”, then press .
For details on setting the vibrator, see “Vibration”
on page 59.
9. When setting is complete, select “Setup End”, then
press .
Flip Setting
You can select whether to end the call or to put it on
hold when you close your phone.
1. Perform steps 1 to 3 in “Changing the Language” on
page 121.
2. Press or to select “Flip Setting”, then press
.
3. Press or to select “End Call” to end the call
or select “Hold” to make it hold, then press .
Group Call (M 7-2-6)
Phone numbers can be registered or updated in groups.
To Set Group Ring Tone
Different ring tones can be set for each group.
When you purchase this phone, groups are set to off.
If you do not set a group ring tone the default ring tone
will be used.
1. Perform steps 1 to 3 in “Call Waiting” on page 130.
2. Press or to select “Group Call”, then press
.
3. Select the group you want to set, then press .
4. Press or to select “On”, then press .
5. Press or to select “Assign Melody”, then
press .
6. Select a ring tone.
For details on selecting a ring tone, see “Ringer
Type” on page 59.
7. Press or to select “Vibration”, then press
.
(M 7-2-x)