User's Manual

85 Fun & Games
Backlight
You can select the method of backlight during the
operation of the Java™
application from the following
three types:
• “On”: Lit whilst the Java™
application is operated.
• “Off”: Unlit whilst the Java™
application is operated
even if a key is pressed.
• “Normal Settings”:Works with the main backlight
setting. (p. 122)
1. Perform steps 1 to 4 in “Operation Priority” on
page 84.
2. Press or to select “Backlight”, then press
.
3. Press or to select “On/Off”, then press .
4. Press or to select “On”, “Off” or “Normal
Settings”, then press .
To Set the Blinking Operation
You can set whether the blinking operation, which is
embedded in Java™
application, is enabled.
1. Perform steps 1 and 2 in “Backlight”.
2. Press or to select “Blink”, then press .
3. Press or to select “On” or “Off”, then press
.
Vibration
When vibrator is set in the Java™ application, you can
choose whether the operation is enabled or disabled.
When a SMAF file is specified in the Java™
application, you can operate the vibrator set in the
SMAF file.
Note
• SMAF (Synthetic music Mobile Application Format)
is a format of music data for mobile phones.
1. Perform steps 1 to 4 in “Operation Priority” on
page 84.
2. Press or to select “Vibration”, then press
.
3. Press or to select “Enable”, “Disable” or
“Link to Sound”, then press .
When you set “Link to Sound”, the Java™
application is synchronised with the vibrator.