User's Manual

Applications 127
Voice Recorder
This allows you to record a voice message of up to 10
seconds, which can be used to remind you of schedule
entries or be sent within a multimedia message. The
recorded voice message is registered in Saved Sounds.
To Record a Voice Message
1. Press to display the Main menu.
2. Press a, b, c or d to highlight “Applications”,
then press to select.
3. Press a or b to highlight “Voice Recorder”, then
press to select.
4. Press to start recording.
To stop recording before the recording time is over,
press .
5. Press a or b to highlight “Save” to save the voice
message, then press to select.
Tip
• You can also record a voice message by pressing
during stand-by, then press R whilst the Main menu
is displayed, instead of steps 1 to 3.
• If you wish to record a voice message again, press C
[Cancel] in step 5. The screen will return to step 4.
• Whilst performing step 4, press A [Options] instead
in order to switch the memory source back and forth
to either the internal memory or the SD/MMC cards,
then press a or b to highlight “Save to”, then press
to select. Then press a or b to highlight
“Handset” or “SD Card”, then press to select.
To Play Back the Saved Voice Message
1. Perform steps 1 to 4 in “To Record a Voice
Message”.
2. Press a or b to highlight “Playback”, then press
to select.
3. Press .
The recorded voice message is played back.
To stop playback, press .
(M 3-5)