User's Manual

Profiles 133
Vibration
When the vibrator option is set on, the phone will
vibrate for incoming calls regardless of the ringer
volume and tone settings.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 131.
2. Press a or b to highlight “Vibration”, then press
to select.
3. Press a or b to highlight “Enable”, “Disable” or
“Link to Sound”, then press to select.
Tip
• When “Link to Sound” is selected in step 3, melodies
are synchronised with the vibrator for the ringtone.
However, this function may not work depending on
the data.
• When you select “Enable” or “Link to Sound” in step
3, “ ” is displayed on the stand-by screen.
Keypad Tones
When the keypad tone is set on, you will hear a
confirmation tone each time you press any keys.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 131.
2. Press a or b to highlight “Keypad Tones”, then
press to select.
3. Press a or b to highlight “On” or “Off”, then
press to select.
If you select “Off”, the screen returns to step 1.
4. Press a or b to highlight “Volume”, then press
to select.
5. Press a to increase the volume or press b to
decrease the volume, then press .
6. Press a or b to highlight “Tone”, then press
to select.
7. Press a or b to highlight either “Preset
Melodies”, “My Sounds” or “Default Tone”, then
press to select.
If you select “Preset Melodies” or “My Sounds” in step
7, perform the following, otherwise go to step 9.