User's Manual

Settings 147
4. Enter the time before Display Saving takes effect in
two digits (02 to 20 minutes) using the digit keys,
then press .
Note
• Display Saving does not work whilst you are calling,
using WAP, or using an application.
To Cancel the Display Saving Function
The display saving continues until either a key is
pressed or there is an incoming alert. The first key press
only cancels the Display Saver. You must press another
key in order to input any numerical or text value.
Setting the Greeting Message
You can set the message which will appear when the
phone is turned on.
1. Perform steps 1 to 3 in “Opening the Phone Settings
Screen” on page 143.
2. Press a or b to highlight “Main Display”, then
press to select.
3. Press a or b to highlight “Greeting Message”,
then press to select.
4. Press a or b to highlight “On”, then press to
select.
5. Enter the message, then press .
Up to 16 characters can be stored as a message.
For details on entering characters, see “Entering
Characters” on page 31.
Tip
• To cancel the Greeting Message setting, select “Off”
in step 4.
Assigning the Pictures
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken by a digital camera or images
downloaded from a WAP site can be used.
To Set Built-in Pictures
1. Perform steps 1 to 3 in “Opening the Phone Settings
Screen” on page 143.
2. Press a or b to highlight “Main Display”, then
press to select.
3. Press a or b to highlight “Assign Pictures”, then
press to select.
4. Press a or b to highlight the screen to set the
picture, then press to select.