User's Manual

158 Settings
Note
• When a divert is set to “All Calls”, “ ” is displayed
on the stand-by screen.
Tip
• If you select “By Service” in step 5, you can select
further divert options in the selected option in step 4.
Checking the Divert Status
1. Perform steps 1 to 3 in “Diverting Calls” on
page 157.
2. Press a or b to highlight the divert option you
wish to check, then press to select.
3. Press a or b to highlight “Status”, then press
to select.
You can now check the status of the selected divert
option.
4. When you have finished, press C [Back].
Cancelling All Divert Settings
1. Perform steps 1 to 3 in “Diverting Calls” on
page 157.
2. Press a or b to highlight “Cancel All”, then press
to select.
3. Press A [Yes].
To cancel resetting, press C [No] in step 3.
4. Press .
All divert settings are cancelled.
To Cancel the Divert Settings Individually
1. Perform steps 1 to 3 in “Diverting Calls” on
page 157.
2. Press a or b to highlight the divert option you
wish to cancel, then press to select.
3. Press a or b to highlight “Off”, then press to
select.
4. Press .
The selected divert has been cancelled.