User's Manual

Settings 169
Connections
You can use the built-in infrared modem to establish
contact between your phone and a PC equipped with an
infrared port, and can use the Bluetooth interface to
establish contact with other Bluetooth-enabled device.
Selecting Infrared Interface
1. Press to display the Main menu.
2. Press a, b, c or d to highlight “Settings”, then
press to select.
3. Press a or b to highlight “Connections”, then
press to select.
4. Press a or b to highlight “Infrared”, then press
to select.
5. Press a or b to highlight “On”, then press to
select.
“ ” will appear on the screen.
The infrared setting will return to off when no data
is transmitted/received via infrared communication.
Selecting Bluetooth Interface
1. Perform steps 1 to 3 in “Selecting Infrared
Interface”.
2. Press a or b to highlight “Bluetooth”, then press
to select.
3. Press a or b to highlight “On”, then press to
select.
If the infrared setting has been activated, you will be
asked whether you wish to deactivate it or not. Press
A [Yes].
4. Press A [OK].
The Bluetooth setting is activated, and “ ” is
displayed on the stand-by mode screen.
To search for other devices to be paired
1. Perform steps 1 to 4 in “Selecting Infrared
Interface”.
2. Press a or b to highlight “Search Devices”, then
press or A [Select] to select.
Your phone begins searching. The list of devices
detected is displayed.
:Handset
:Car kit
:Others (e. g. PC)
3. Press a or b to highlight the desired device, then
press or A [Select] to select.
4. Enter a pass key, then press A [OK].
5. Press A [OK].
(M 9-7)